PDA

View Full Version : 98-02 F-Body Power Windows?

Sunset T/A
10-02-2006, 03:17 PM
Has ANYONE became frustrated with their power windows and done a conversion to manual, and if so, what parts did you use. Maybe share a little about how-to.
2001NBMZ28
10-02-2006, 04:34 PM
Seen it the other way around...frustrated...yes...just get a replacement motor with a lifetime warranty and do it yourself. Much easier the second time around and probably much cheaper than trying to go manual.
Hurley711
10-02-2006, 04:59 PM
I believe it is Autozone who sells the motor with the lifetime warranty on it....
sgt0704
10-02-2006, 06:31 PM
is there a way to make it "express down" with only the drivers side module? i.e. push the drivers side window button, and both window express down, but you can use the passenger button to control the window seperatley? or even the passenger door button to control the window seperately.
Corvettekid82
10-02-2006, 08:25 PM
Yes.. there is. My pass window is express down as well as the drivers side. The module has gone up in price considerably since I did it, but I still think its worth it.
http://www.bfranker.badz28.com/fbody/expresswindow.htm
sgt0704
10-02-2006, 10:43 PM
I know that. but can you do it to run off the 1 module.
SpeedAddict38
10-04-2006, 07:22 AM
I believe it is Autozone who sells the motor with the lifetime warranty on it....

autozone window motor will not fit on a 01 ss
2001NBMZ28
10-04-2006, 12:13 PM
Really? They must have given you the wrong part - helped a buddy do both of his about a month ago with AZ motors.
SpeedAddict38
10-05-2006, 12:36 AM
Really? They must have given you the wrong part - helped a buddy do both of his about a month ago with AZ motors.

it was the right part they said they changed not long ago who they got them from
Corvettekid82
10-05-2006, 08:30 PM
I know that. but can you do it to run off the 1 module.
You'd probably overload the module if you ran both sets of wires thru it. Some of the newer GM vehicles have both windows express down from the factory... you should look into one of their modules, maybe it can be retrofit to work on the camaro.
dxdenis02
11-30-2006, 02:23 PM
I know that. but can you do it to run off the 1 module.

not with the gm module..as it suppots only one window but there are after market window modules that supports up/down of two motors..dei clifford
superman4evr
12-10-2006, 08:28 PM
You know these motors go out because,
AC Delco is one shitty part. And the window is heavy. The motor can't handle it. I have had great luck with either the Dormans window motor, or Siemans.
AZ sell both.