Z0-6 wheels & tires for a Camaro?

[98CamaroSS]

Does anyone here know if I can fit factory Z0-6 wheels and tires from a Vette to my 98-Camaro-SS? They are the 17' front and 18' back, I want to make sure they don't rub or have clearance problems. Thanks.

[02T/AWS6]

factory Z06 rims won't fit on a camaro becasue the offset is different, but i have replica Z06 rims that look identical to the real ones specifically made for the trans am and camaro and they look awesome

[98CamaroSS]

Are you sure the factory one's don't fit? I have seen the CMMG Camaro's that came with the ZO-6 wheels from new. I know the front 17' aren't a problem they are 265/40/17', but the back one's, 18' could be as they have a 295/35/18' tire.:brick:

[cobrahunter]

I hadn't heard of the factory Z06 wheels fitted on Camaros, which is why I went with the Motorsport Z06 wheels when they first came out...and have been happy with them ever since.


http://memimage.cardomain.net/member_images/8/web/392000-392999/392726_115.jpg


http://memimage.cardomain.net/member_images/8/web/392000-392999/392726_116.jpg

http://memimage.cardomain.net/member_images/8/web/392000-392999/392726_147_full.jpg

[98CamaroSS]

Cobrahunter they look awesome.:yup: Can You tell me what size you are running on the rears, is it factory 18X10.5 on the back w/295/35/18? Thanks in advance.

[cobrahunter]

In back I'm running 285/35 18's. Being that the car is so lowered, 295's would have rubbed the hell out of the fender. As you can see below, even with the fenders rolled in a bit, it's pretty close...but no more rubbing issues. If you look closely, you can see where the tire was rubbing before the fender was rolled. Also, the paint chipped a bit, but that's been fixed.

http://memimage.cardomain.net/member_images/8/web/392000-392999/392726_35_full.jpg

[lrader99]

ok another question...sorry figured id just use the thread that was already open...i have a 2000 trans am with the eibach sportline setup..can i even get ZO6 wheels in there...factory ones i mean...the 17x9.5/18x10.5...obviously the bump stops would have to go...but will they clear the 1/4s?