Just bought a TSP Torqer2

[Huskerz1]

It was between the 228r and the Torqer2. Got the camshaft package with the hardware and gasket kit. I know it is recommended to get a new oil pump, but which one? LS6 factory or the LS6 ported? About $50.00 difference. Is the it really worth getting the ported? Also, with 76k on the clock do lifters and rockers sound like a good idea?
Pacesetters, ORY, LS6 intake, 3.73s, and pulley are coming soon.

[SSwt00SS]

i just bought the stock ls6 oil pump and RPM porting and shimmed it on the install for free. $50 bucks saved for you there. yes get it ported, for better flow. congrats on the cam, man!

[Huskerz1]

i just bought the stock ls6 oil pump and RPM porting and shimmed it on the install for free. $50 bucks saved for you there. yes get it ported, for better flow. congrats on the cam, man!

Hey man what's up? Ya I can't wait to get it in. I got a few more items to buy so I can get it done all in one shot. So are you whippin ass around here with your setup?

[SSwt00SS]

Hey man what's up? Ya I can't wait to get it in. I got a few more items to buy so I can get it done all in one shot. So are you whippin ass around here with your setup?

whoppin ass...lol I'd like to think so, as I still only have 350rwhp. I have the ls6 intake and stainless steel headers sitting on the floor at home. I'm putting the headers in next friday and then getting it tuned at RPM. I'm going to sit on the intake for now so I can save up and look for either 36# or 42# injectors. tell you what though right now she pulls to almost 95 in 3rd gear hauls and loves those high rpm's...lol

Mainly wanted the LT's installed w/the loudmouth for the Texas state fair on Oct. 14th. You should come out too, you get in for free, just have to get there before 9am and can't leave until 6pm. There are forms you need to fill out and mail in to get your fair/car show parking pass. Last year was awesome!

what's new w/you?

[02gixxersix]

I'm glad this is here because I am trying to decide between these 2 right now.

[Frankthetank]

I got a torquer v2...Had new lifters, rods, oil pump, timing chain and pushrods put in too. Look at my numbers though.....with only that cam, headers, exhaust a 3500 stall and a lid im runnning 12.67 on bald ass street tires and 2.73 gears!!!! Also pushing 364hp 400 ft lbs of torque

[Frankthetank]

Youll love the cam man

[INMY01TA]

I got a torquer v2...Had new lifters, rods, oil pump, timing chain and pushrods put in too. Look at my numbers though.....with only that cam, headers, exhaust a 3500 stall and a lid im runnning 12.67 on bald ass street tires and 2.73 gears!!!! Also pushing 364hp 400 ft lbs of torque
You should be going alot faster than that.

[02gixxersix]

Yeah but he does have 2.73's and bald tires. I know even with good tires and very little mods I can spin my tires all the way to redline with a 1st gear 2500 stomp.

[Frankthetank]

yea and its stock suspension.....I just bought some BMR adjustable rear suspension for 730$.....after i put this on...im getting some gears.....strappin on some slicks.....i will hopefully get mid to low 11's

[Huskerz1]

I got a torquer v2...Had new lifters, rods, oil pump, timing chain and pushrods put in too. Look at my numbers though.....with only that cam, headers, exhaust a 3500 stall and a lid im runnning 12.67 on bald ass street tires and 2.73 gears!!!! Also pushing 364hp 400 ft lbs of torque


I'm debating the lifters but the oil pump, and LS2 chain are a definite go. I'm hoping for about 370-375 with the cam header tune combo. Is that realistic for my 6-spd?

[Huskerz1]

whoppin ass...lol I'd like to think so, as I still only have 350rwhp. I have the ls6 intake and stainless steel headers sitting on the floor at home. I'm putting the headers in next friday and then getting it tuned at RPM. I'm going to sit on the intake for now so I can save up and look for either 36# or 42# injectors. tell you what though right now she pulls to almost 95 in 3rd gear hauls and loves those high rpm's...lol

Mainly wanted the LT's installed w/the loudmouth for the Texas state fair on Oct. 14th. You should come out too, you get in for free, just have to get there before 9am and can't leave until 6pm. There are forms you need to fill out and mail in to get your fair/car show parking pass. Last year was awesome!

what's new w/you?

Well I finally got around too spending some dough on the car. Just been working alot lately. My previous car cash went for a trip to Mexico with the wife. She thought we needed that more. Of course we here on ls1.com know better. What could I do? LOL.

[Frankthetank]

dont worry ull get the torque u need man.....ull be where u need to be :D!

[Frankthetank]

yea thats realistic and more! a 6 spd has allot less drive train loss then my auto

[stevenm357]

I'm buying one myself, great to hear the good reviews.

[INMY01TA]

yea and its stock suspensionDoesn't matter.

[Frankthetank]

lol.....found out a little more....i was off....I forgot I had even posted that forever ago.....The 400 ft lbs is wrong it was a ping spike on the dyno....thats when i first got it lol. i hit a 12.42 with a failing tranny and street tires......I still never ran it on drag radials

I got a torquer v2...Had new lifters, rods, oil pump, timing chain and pushrods put in too. Look at my numbers though.....with only that cam, headers, exhaust a 3500 stall and a lid im runnning 12.67 on bald ass street tires and 2.73 gears!!!! Also pushing 364hp 400 ft lbs of torque