Hyper Flex Bushings

[ryan_gilson]

I just put on a set of hyper flex bushings (BIG DIFFERENCE). I did the entier car and everything fit well untill I got to the front LCA's. I don't know if hyperflex sent me the wrong parts or if they got cheep at the shop when they replaced the LCA's the dimensions were all wrong I had to carve down the LCA's to fit and remove a lot of material form the bushings as well. Has anyone else put the compleet kit on there car? did they have similar issues?

[ryan_gilson]

Any Anwsers? I am bout to just replace the 7 day old front LCA's out of fear. I don't know if somthing might let loose now or not. Anybody Anybody Fairis Fairis Buler!

[mrr23]

did you call them? after all, they would know.

[ryan_gilson]

I called them but they were actualy dicks! They even went as far as to ask if I know what I was doing! But anyway they send me an instilation diagram that was the best I could get out of them. The part #'s mach up with what they gave me. They just don't fit. Also the directions say to remove the shock collers. That would be a major under taking. They are welded in. I finaly got it all forted out I had to hacksaw/dremmel the shock collers down to about 1/2 there size then I used a router and a home made jig to remove material form the bushings to reduce the O/D. Finaly got everything in and it works realy well. I am very happy with it. I just question if this is going to cause issues down the rode. this is the only hafassed thig on my car.