Dragdaddy71
09-20-2006, 12:47 PM
Hello, Im new here and wanted some advice. I am wanting to know if what I have is on track or if I am Short on HP and torque for what I have.
1999 ss camaro, nine inch 3.73, th400 3800 stall and 408 iron block.
Heads are 243 castings with port work from Jason at Bully performance, they flow 320 at .600 in. and 230 at 600 ex. 2.05 valves 1.60. Comp cams dual valve springs and comp cam 605/612 lift hdry roller.
ls6 intake, 42lb injectors,STOCK fuel pump and rails,
Pacesetter 1 3/4 headers with y-pipe and full exhaust.
Mail order tune not been to the dyno yet.
Underdrive pulley and no air conditioning.
The car ran 11.28 at 119mph but I am thinking there should be alot more in it, I hope.
Looking for suggestions on upgrades. Thanks Rich
1999 ss camaro, nine inch 3.73, th400 3800 stall and 408 iron block.
Heads are 243 castings with port work from Jason at Bully performance, they flow 320 at .600 in. and 230 at 600 ex. 2.05 valves 1.60. Comp cams dual valve springs and comp cam 605/612 lift hdry roller.
ls6 intake, 42lb injectors,STOCK fuel pump and rails,
Pacesetter 1 3/4 headers with y-pipe and full exhaust.
Mail order tune not been to the dyno yet.
Underdrive pulley and no air conditioning.
The car ran 11.28 at 119mph but I am thinking there should be alot more in it, I hope.
Looking for suggestions on upgrades. Thanks Rich