~Custom Rear Mount HELP~

[pyro71985]

Ok well I think I have just about enough money to complete this entire kit....

Keep in mind this is a street and OCCASIONAL track car....

Now my goal is to have a set up that spools pretty quick at or below 3000rpms (preferably below) and make around 500rwhp at around 5psi (if possible) with a custom rear mount setup. With the option of turning it up to around 600-650rwhp.

Heres what I had in mind....and if anyone can help with the ones im not sure of PLEASE DO!


t67 turbo (dono what ar)
6.0 Heads (anything better? what gain will i see?)
z06 Camshaft (anything better? what gain will i see?)
Spec 3 clutch
TiAL BOV (dono 9psi? 11psi?)
Wastegate (not sure which is a good one)
42lb Mototron injectors (should i go bigger?)
255lph Walbro fuel pump
valve springs (not sure which ones)
pushrods (not sure which ones)
Ebay Intercooler w/ 3" piping
Tilton Differential Pump
2.25" piping from turbo to MAF

Anything I missed? Any suggestions??

[UPSSales]

I suggest a P-Trim .85 A/R exhaust housing.

[ericwilloughby]

Since you have that much money to spend don't do the rear mount. You can get a single or twin under hood for $5,000 O.F.I. or Gen TT.