Next mod ?

[jinxeng]

Hi all
I'm thinking on getting the 80mm BBK throttlebody for my 00' z28. My current modifications are: SLP lid, SLP CAI, SLP bellows, and a loud mouth exhaust. What do you think about this mod ? I'm thinking about getting a MAF soon after and stopping with the performance.. for now.

Do you think the 80mm is too big ? thanks in advance

[5150]

For a stock motor yes. Have the stock tb ported.Save your money and put an ls6 intake on it.

[Hi-Po]

First mod(s) should always be opening of the exhaust. Sure you can get the air in, great. now try to get it out. Get yourself a nice set of LT headers. Since you live in sunny Cali, dont have to go $ crazyand get stainless. Then start opening the intake, headers, throttle.

[jinxeng]

thanks for the advice.
sorry for the noob q but what does it mean by "porting" the tb ? does it just mean by making the airways a bit larger ? thanks again

[Hi-Po]

When porting, the object is not to make things lager/ rather smooth out the direction the air has to travel. When you make things to large, you lose air speed velocity, which in turn hurts low speed power. In a short,

[lilchris]

well it seems your off to a good start for the next mod i would have to say get a nice set of longtube headers or possiably a gear this to make a very noticable differenc in how the car runs.and as far as the tb i say go to installuniversity.com and it shows step by step how to port and polish it yourself i did it so i know anyone can just take your time in doin so