What Brand of Converter are you using?

[Ed Blown Vert]

:flex:

[Zboner]

where is Edge??

[Ed Blown Vert]

Right there :p

[F-Bomb]

mine is a 3800 stahl, and the service from pi is great!

[1fastcamarosss11]

just got a fuddle, haven't installed yet. 3,600

[0rion]

3500 fuddle here

[Zboner]

thanks Ed

[juiced99ws6]

Fuddle customer service and durability is awesome.. highly recommend them

[12secSS]

B&M :cool: Will be switching to a 3500 (70443) here shortly. :burnout:

[LS2Tuner]

I USE DACCO IN ALL MY RIDES!!!! Broke and burnt up MANY TCI's over the years!! Had VERY good luck with Dacco's haven't hurt one yet.....And blown 300 shot out the gate for a year now on one of there 3200-3500 conv.
Haven't changed the conv. in the GOAT yet.

[Y2KPewterSS]

Have had the same TCI 3800 for about 3 years now. :yup:

[mrr23]

yank py3400e

[BerryWS6]

Vig 3800 I love it and PI's customer service is great!

[BURNEM]

Yank these tires up with a Yank.

[VORTECH Z]

I have an ART CARR 3500 and have had it for 3 yrs.

[MSP01SS]

2800 Vig. Been in for 3 years. really nice converter

[02blkws6]

Vig 3600 and it feels too tight to me with 4.11 gears. Need to step up to a 28" tall tire.

[The Scientist]

PI Vig 3000-3200. Haven't got tires on her that can hold it on the street.

[Hawk241]

Has anyone seen the converters/companies on Ebay? Anyone have used these converters, examples were converters from Monster, Direct transmission and ACC. I did email quite a few that I saw on the feedback list, with only a few replies, most were more about the service than the performance. I know you get what you pay for, for the most part, just curious....anyone?

[slims00ls1z28]

Getting a PI Vigilante 3600 probably tuesday. I love the fact that I am only 15 minutes from their shop. I'll be able to pick it up the same day I pay for it :)

[Stretchs T/A]

Yank SS3600

[98turbols1]

Neal Chance custom converter/th400

[Hawk241]

Just ordered a Fuddle HPS 3,600...Trans GO shift kit and B&M trans cooler.., anyone can chime in on what to expect or shortcuts. 3.23s for now..Going to have a recommended "trans" guy do the work..I know I prolly need some sticky tires..thinkin of some Nittos soon..

[LS2Tuner]

Just ordered a Fuddle HPS 3,600...Trans GO shift kit and B&M trans cooler.., anyone can chime in on what to expect or shortcuts. 3.23s for now..Going to have a recommended "trans" guy do the work..I know I prolly need some sticky tires..thinkin of some Nittos soon..

Well if your "thinkin sticky" and Nittos your mistaken!!
Unless you plan on only trying to get them to work on a WELL preped track they will NEVER hook on the street unless you have a 13 second car.
Save yourself the wasted money and at least get the BFG's if your on a budget.
If money is NO object and your true goal is trying to hook on the street than get some M&H's. Our testing has shown that the Mickeys will hook up second best in drag radials with Hoosiers coming in third.
The Hoosiers are a little lighter than the Mickeys so it helps the mph but due to the lack of tread grooves they tend to spin easier on the street than the M&H's or Mickeys.
Either way I wouldn't run Nittos again unless they were on a daily driver.

[blackTA6585]

Just installed Vig 3600 and so far its great.

[99SSls1]

st2800 yank - not installed yet but will be soon. . .

[FuhBreezeE]

Where's B&M?

[440 rwhp trans am]

yank FTMFR

[Ryans99LS1]

I will be going with fuddle 36000 in spring time. Never heard anything bad and cant beat the price!

[Jay Dee]

:shots:I just did a lot of mods to my car and now I need a new torque converter. I just don't know what brand to get. The guy at the shop I but my stuff from says a TCI but i don't know. Last Dyno I had was 430 to the floor but I've done a few things so I'm expecting about 450-475. What do I need. WS6 convertable 2000.:shots:

[Ed Blown Vert]

I have been happy with my Vig 3200

[LS2Tuner]

:shots:I just did a lot of mods to my car and now I need a new torque converter. I just don't know what brand to get. The guy at the shop I but my stuff from says a TCI but i don't know. Last Dyno I had was 430 to the floor but I've done a few things so I'm expecting about 450-475. What do I need. WS6 convertable 2000.:shots:

Had nothing but bad luck with TCI's conv. They work ok until the baby get's bottle feed. I really like Daaco's conv. and you can't beat the price!

[shortdog]

Upgraded my Street Edge to a higher stall Pro Edge converter and the TCI is coming back out.

[TransAmy]

getting my fuddle 3200 installed on saturday!! :woot:

[LS2Tuner]

Upgraded my Street Edge to a higher stall Pro Edge converter and the TCI is coming back out.

What a surprise to hear of another car with a TCI being removed........:usa:

[shortdog]

Though, I got the tci rebuilt, along with my tranny it took out a few yrs ago, it's coming back out due to it being too loose for the bottle. The Edge is just a better made converter with anti-ballooning plates, etc. :worship:

[mghawk57]

John at Fuddle is the best - Service,tech advise and warranty

[Joels1]

I agree he knows his stuff.

[RacerBob]

Vig 3200. Not in yet.

[MSP01SS]

Though, I got the tci rebuilt, along with my tranny it took out a few yrs ago, it's coming back out due to it being too loose for the bottle. The Edge is just a better made converter with anti-ballooning plates, etc. :worship:


What size stall are you going with?

[MattD]

I had a Fuddle 4000 in my 99 and I will be going the same route with my 02.

[CandyRedZ28]

3200 vig, knocked down half second off 1/8 mile, also had tune and stickies

[N20LT4]

Pro Yank 3400 here...got me into the low 11's.

[PONYEATER-01LS1]

unfortunatly i have a Fuddle but I will have a YANK real soon

[mghawk57]

PONYEATER-01LS - Unfortunatly - tell me more please - pm if you want - I'm real interested!!!

[PONYEATER-01LS1]

PONYEATER-01LS - Unfortunatly - tell me more please - pm if you want - I'm real interested!!!

well I gave him money on March 20th to upgrade to a 4000, which I have a 3600 now from him, and long story short its may 23rd and i have nothing now. And of course i got the sad sob story that it was shipped to the wrong address when he really never shipped ZIP nothing. He is such a lousey buisness man.

[Y2KPewterSS]

well I gave him money on March 20th to upgrade to a 4000, which I have a 3600 now from him, and long story short its may 23rd and i have nothing now. And of course i got the sad sob story that it was shipped to the wrong address when he really never shipped ZIP nothing. He is such a lousey buisness man.

Stick to facts and avoid using insults in the future.

[PONYEATER-01LS1]

Stick to facts and avoid using insults in the future.

FACTS?? these are the FACTS! I got screwed that my friend is a fact and that is what Im doing stating the facts

[N20LT4]

FACTS?? these are the FACTS! I got screwed that my friend is a fact and that is what Im doing stating the facts

Sounds to me like you were stating the facts. I don't see any other reason for you to make such a claim. I, along with many others have experienced a bad situation with a company that was supposed to deliver but didn't. Some don't like to believe that a person could actually practice those type of buisness ethics, but it happens all the time. And yours seems like a worst case scenario.

Good luck and hope everything works out.

[PONYEATER-01LS1]

Sounds to me like you were stating the facts. I don't see any other reason for you to make such a claim. I, along with many others have experienced a bad situation with a company that was supposed to deliver but didn't. Some don't like to believe that a person could actually practice those type of buisness ethics, but it happens all the time. And yours seems like a worst case scenario.

Good luck and hope everything works out.




i been dealing with this guy since 2005 when i bought my first one from him and hea has just totally went down hill, like just stright up ignoring any communications with him.

[N20LT4]

i been dealing with this guy since 2005 when i bought my first one from him and hea has just totally went down hill, like just stright up ignoring any communications with him.

Welp, learn from your mistakes and know better next time.

[PONYEATER-01LS1]

Welp, learn from your mistakes and know better next time.

aint that the truth. I just hope everyone else learns from mine as well.

[Y2KPewterSS]

FACTS?? these are the FACTS! I got screwed that my friend is a fact and that is what Im doing stating the facts

Calling someone a lousy businessman is not a fact, thats your opinion and an insult. Its not necessary to call someone lousy when stating what happened. This is also not the appropriate thread for this matter. The sponsor feedback forum is where this type of discussion needs to continue.

[ICRAZY6]

Yank, I've had a SS3200 and now a SS3600. I would recomend them to anyone!

[PONYEATER-01LS1]

? whatever dude

[cartert75]

Edge 3200 2.5STR

[cartert75]

where is Edge??


Simi Valley CA

[z06this]

What happened to fuddle racing? They won't respond to my emails or my phone messages? Anyone know? They go out of business or something?

[PONYEATER-01LS1]

What happened to fuddle racing? They won't respond to my emails or my phone messages? Anyone know? They go out of business or something?

so sorry about your luck

[z06this]

You having the same problem? I'm trying to get some info on a converter from them.

[PONYEATER-01LS1]

You having the same problem? I'm trying to get some info on a converter from them.


well i "had" the same problem, paid for it and didnt get it for almost 3 months so i did the same in return to him waited 2 months then sent the old one back to him

[z06this]

Maybe it's their 3rd job or something. I expect better customer service than this though. I guess I'll just keep pursuing them until I get a response.

[PONYEATER-01LS1]

Maybe it's their 3rd job or something. I expect better customer service than this though. I guess I'll just keep pursuing them until I get a response.

you will regret it i promise!! pay the extra money for a name brand

[mghawk57]

Does anyone know what happened to John at Fuddle?????

[RaSScal]

Stock

[sscamaro2000]

I bought the TCI break-away for my 450 HP LS1 and it lasted 5,000 miles before shelling out completely one night. I have now purchased an ATI Treemaster that is basically a custom-made racing converter that they make to fit the exact specifications of your car. I have talked to several people that race for a living and they say that the ATI TC's are practically impossible to break. I learned the hard way that production converters like TCI and B&M are junk. Check them out at http://www.atiracing.com/ and you will see that they use superior materials and craftmanship. The owner, Jim Beattie, is very helpful.

[RaSScal]

I had a TCI converter that lasted 2000miles before vomiting in the tranny in my old 1996 Z28. Very disappointed with TCI products.

[67CamaroRSSS]

Fuddle 3400.

[qwkgto]

I have a new in box TCI billet converter fo sale $1600 3 clutch lock up this is their top of line converter..ill take $800 shipped for it. 3200 stall. pm me for pictures and details.fits 4l60s

[LS2Tuner]

http://www.coanracing.com/Catalog.asp?CatClass=11CO




:leghump:

[346ci]

running a Yank on mine

[NoscamaroSS]

Performabuilt 3500 in mine

[scubamark3995]

Has any one heard of or used a cirle D torque converter? They are located in houston.

[scubamark3995]

Well after talking to a few people, I ordered the circle D 3700 stall. I guess I will be going over to century transmissions to get the right parts into my tranny.

[Autoslick]

Just got a Midwest Converter today. Looks good, will let you know how it run tomorrow night.

[Autoslick]

There is a guy that kicked my butt with a Midwest Converter. Mine got here today. I think his screen name is Chevykid. I will see you on the street dude.

[Z28boy2000]

anyone have any opinons on BDR Converters

[lorich1]

I am running a West Coast Converter, 3200 stall

[68fastback]

I have a fti 3600 converter.

[streetassasin]

circle d 4c

[shortdog]

Pro Edge 4000 here, 2 years and still going strong. I'll probably send it back this winter to get it refreshened & tightened to spray the piss out of it. :eek:

[dart]

Anyone use Rev Max torque converters ?

[squirlnutz]

I just got last night my RevMax 3500 stall. They have been making diesel converters

[qwkgto]

I went to a YANK converter this past fall picked me up 11 MPH and from a 1.7ish to a 1.50 60ft,best damn conveter ive ever used! this allowed me to put my car in the 9s,every thing else being the same,same tune,leaving off the foot brake..

[dart]

I just got last night my RevMax 3500 stall. They have been making diesel converters

How do you like the Revmax converter ?