stall converter

[Z28Y2K]

What size stall should I use for my 2000 Z28 when innstalling a 373 rear end. Car is still somewhat of a daily driver want reliability if possible.

[Zboner]

for a daily stick with at least a 3,000 to 3,500 area

[GA Country Boy]

What size stall should I use for my 2000 Z28 when innstalling a 373 rear end. Car is still somewhat of a daily driver want reliability if possible.

There are currently four other threads going on about the same subject. Stall speed is directly related to engine output. The 'correct' stall for one engine may not be correct for another engine since the exact same torque converter will produce different stall speeds on different motors. You should check out the other threads. I made a lengthy post on this subject in one of them.

[nhraformula]

3000-3500 for a daily driver