PDA

View Full Version : will these wheels fit an LT-1>?

soontobe.ls1
09-08-2005, 10:19 PM
My brother has a black 95 trans-am and is looking to put black wheels on it, he wants to put 17" mustang bullit wheels black with the chrome lip and deep dish bullits in the back i was wondering if they would fit

heres the specs

17x10.5" deep dish rear wheel
Wheel Backspacing: 6.84" Wheel Offset: +27mm bolt pattern: 5 x 4.5 inch

17x9" front regular dish wheel
Wheel Backspacing: 5.95" Wheel Offset: +24mm bolt pattern: 5 x 4.5 inch


any help would greatly be appreciated because he;s selling the car to me next year and i think the wheels would look amazing even though they're for a rustang thanks
boyd
09-15-2005, 09:45 AM
nope will not fitt you have a 5x4.75 lug patern same as 5x120,65mm
most bmw wheels will fit with 5x120mm lug pattern hope it helps!:cry:
Eugenio_SS
09-15-2005, 10:37 AM
the BMW pattern (5x120mm) is not recommended... there have been instances where the wheels have come off while driving... this is due to vibrations and nuts coming loose... if you ever go with this alternative, make sure you torque the nuts frequently.
Make sure you have the proper pattern and that the wheels are hubcentric.
Warbird
09-15-2005, 11:08 AM
I would just get a set of Torque Thrust II wheels and have them powdercoated.
boyd
09-15-2005, 11:09 AM
the BMW pattern (5x120mm) is not recommended... there have been instances where the wheels have come off while driving... this is due to vibrations and nuts coming loose... if you ever go with this alternative, make sure you torque the nuts frequently.
Make sure you have the proper pattern and that the wheels are hubcentric.

yes that is my understanding too ,and if you use hubcentric rings?I thought they will work fine and the wheel does not come off....pls correct me if i am wrong!!
98lswonta
10-09-2005, 06:42 PM
bolt pattern is totally different...I would go with the torgue thrust wheels as welll...