STS TURBO hp question?

[00TAWS6]

I have a 00 TA WS6, it has a lid and no cats and i was thinkin about puttin the sts turbo setup on my car. Its gonna be the 8psi turbo, was wonderin what is the true hp yall r puttin the ground if u got this setup.

[LSWON_WS6]

8 psi...your looking at 440 and maybe more...seriously real numbers just do some research, i think its an awesome setup

[00TAWS6]

I just hope i end up lovin it too.

[SSilver2K]

502rwhp/576rwtq @ 8 psi here.

01' SS M6 - STS with T67
TRT FMIC
Snow Performance Meth Injection kit
Monotron 60lbs. injectors
Racetronix fuel pump
LS6 cam
PRC Dual valve springs
Paceseter Long Tubes and TSP catted Y-Pipe (from N/A set-up)
Some other stuff
Still on 4.10 gears

[enginjoe]

I did 440rwhp/419rwtq with a boost leak at 5psi setting.

[00TAWS6]

Im looking into a 8psi kit with methanol inj., fuel pump, injectors(don't know what size), and a electronic boost guage. Im just lookin to get around 470-490 to the ground. Hopefully i will have the ls6 intake for it to before i get it. Might be gettin in next week, just all depends.

[cailey37]

Ok....mine was built off the STS concept...does that count....lol

[OreoLt1]

02 Z28 Ls6 bottom end ls1 top end, no cats, 4.10's, T67 STS w/42lb injectors OEM fuel pump puttin out 448hp/431tq @5 psi and 504hp/582TQ @ 8 psi. Sheets will be up soon

[00TAWS6]

Sounds good man!! Might be a stupid question but, what the difference between ls6 bottom end and ls1. Im not that noligable about motors yet! Atleast not new ones.

[OreoLt1]

The only difference really the block. The block is the LS6 block instead of the LS1. Ls6 block has larger windows in the crank bay/area. Some say there is no real difference but from tests that I have seen by the GM performance divison with boost the crankcase pressure is not as great as the LS1 blocks, but not by much.

I was lucky enough to find one with an LS6 block(only 20% of the f-bodies in 02 came w/ the LS6 block) better.

Hopefully I will have a video link and the dyno sheets up soon.