Tech Moderator Applications

[Ed Blown Vert]

We are possibly looking for new Tech Moderators.
Is it you? Are you up to the Task?
Moderators need to be here almost on a Daily Basis.
They would watch over their forum and help members with their questions.
They would create new threads. And Enforce the Rules of the Site.

And don't forget, you don't have to be a Mod to help the members.

Applicants have to be unbiased. And stay neutral.
Trouble Makers and Members with Warnings Need not Apply.

If this is you, post up why you think you should be a Moderator.
And what forums you would be interested in watching.
Some background about you would help.

Any questions please post them here.

[Zboner]

my name is Joel, im starting Mechanic School this fall, then after that doing Body shop, im here everyday and been here since the start of the second LS1.com, and love the site.

[sgt0704]

I'd like to moderate the stereo forum. I've done all the audio stuff to my old 91 RS and my new 98Z myself. I don't have any formal training, but from what i've done, i could answer a lot of the questions that come up on the stereo board. if you look through the stereo board, you'll see some of the work that i've done.

[HASTINGSRJ]

:hi: pick me:D

and Ed, you know my mechanical ability:D

[Zboner]

:hi: pick me:D

and Ed, you know my mechanical ability:D

***joke, cough***, Cough***:giveup:

[MadSeason]

A list of Addition thread I wouldn't mind modding.

V6 Section - Had one before I swapped an LS1 into it so I'm familiar with the mods

Firebird/WS6 - Since I own one with H/C, know a lot of their history, build codes, ect...

Suspension and Handling - I've got a setup on my car that pulled 1.004g on the skidpad

Showcar and Detailing - I've tried just about every product out there

Stereo and Electronics - I've rewired a 94 camaro to be OB2 when I did an LS1 swap, have fixed shorts in the dash and power mirrors, have replaced window motors, and rewired stereos in a 94 camaro and 00 bird. I have also fixed a few monsoon headunits and have the ac delco repair manual for them.

[jmhvenom]

I'm Joe. I was on here a bunch during the first LS1.com. Just started getting into the second version recently. Basically, I spend almost my entire day on the boards because I have computer access at work lol. I would have something to add in any of the sections and would like to modd any of them. I have had my Camaro since I could drive and have been on the site almost that long. Plus, a dancing banana. :nana:

[ProjectCamaro.com]

I would LOVE to help out in the Appearance Section. I have done tons of modifications to my car and all of them myself. My car as made it into different GM and Camaro magazines with several page spreads including making the cover. I know VB very well as I own and run my own forum with it - ProjectCamaro.com. I was a big part of this site years ago before the database was lost and I've just been a little slow coming back on. I check the forum several times a day and if a mod I'll just live in the Appearance Section even more so.
Yes it's an outdated picture (new ones coming tomorrow) it still show's the basic look of my car.

http://redls1.com/IMG_6687.jpg

[BlownC5]

I would be interested in helping out in any section, I've built a 99 FRC blown Corvette and have the time to be online to help. My job gives me the opportunity to be online too. I work 3rd shift and could help with the graveyard shift. Thanks

[sgt0704]

so when do we find out, who if anyone get's a new job?

[ProjectCamaro.com]

My job gives me the opportunity to be online too.

I just have no life outside the internet and LS1's so that's why I'm always here :nana:

[Trouble maker]

How come I'm Singled out already!?You said "Trouble Makers need not apply"!:ughlaugh:

[Ed Blown Vert]

so when do we find out, who if anyone get's a new job?

I will contact the new moderators directly through PM's.

How come I'm Singled out already!?You said "Trouble Makers need not apply"!:ughlaugh:

:hasquint:

[Nitrous]

I don't need to be a moderator, been there, done that but if anyone needs help with an LS1 truck conversion, I'll try to answer your questions to the best of my ability.

[96lt1z28]

I would like to help with the lt1 section. I am on everyday and know alot about the cars.

[chris2000ss]

I would like to moderate the Detailing section and the Camaro / SS section. I have been on here since 7/2001 lost all my posts when the site went down..

-chris

[Sarge]

I'll be glad to help out if needed.

[Nastyfoot]

I'll be glad to help out if needed.

Ya gonna have to put the black cowboy hat away and wear a white one ya know.;)

[Nastyfoot]

Oh, and I'd apply, but I'd ban too many people, myself included.:box:

[Ed Blown Vert]

I'll be glad to help out if needed.

You're not here long enough to help















:hide:

[Sarge]

Mebbe not. But I got 40 weight Cosworth running in my veins held together by C&W quick connects. My pecker has a .710 lift without any blue pills and comes on strong out of the hole. My fuel pump maintains a steady 62lbs. of pressure....without any boost a pump...my ECM misfires every once in awhile though...my tuner sez it is because I abused it back in the 60's :)

[Ed Blown Vert]

I think maybe you should just send me that BAP :p

[Sarge]

PM me....And dont post no pics of tig ol bitties. It worked well for me...I just dont need it anymore since we did the Walbro bucket mod thing.

[BlownC5]

I'd be more than happy to help out the Corvette section too. Let me know. Thanks

[predator]

i would help out... though im probably considered a trouble maker... i would be glad to watch over the vette forum, i know the ropes around here pretty well and have been around since b4 the crash... i have over 1000 post, most of which are from the AAG section under 20 of which come from a train of any kind. Some warnings of mine were recently removed, but 5 of the 6 were pretty much BS and the other was prolly 8 months old...

Oh yeah i have a mechanical engineering degree and though im not a car god because of my lack of cash i have been working on vehicles and around them all my life. Cars actually are my life...

-me

[Ed Blown Vert]

A list of Addition thread I wouldn't mind modding.

V6 Section - Had one before I swapped an LS1 into it so I'm familiar with the mods

Firebird/WS6 - Since I own one with H/C, know a lot of their history, build codes, ect...

Suspension and Handling - I've got a setup on my car that pulled 1.004g on the skidpad

Showcar and Detailing - I've tried just about every product out there

Stereo and Electronics - I've rewired a 94 camaro to be OB2 when I did an LS1 swap, have fixed shorts in the dash and power mirrors, have replaced window motors, and rewired stereos in a 94 camaro and 00 bird. I have also fixed a few monsoon headunits and have the ac delco repair manual for them.

They are all yours. So get going.... :p

[MadSeason]

They are all yours. So get going.... :p

:ike:

[Blown25thT/A]

I would be glad to help with the LT1 section. I've been messing around with LT1's for quite a while now. I think a might have some good information to pass on to others. I have built my own 355 Procharged LT1, and helped several people out with their cars. If I don't know the answer to something I have several sources that I can find the answers.

[juiced99ws6]

Hey Ed I wanna try and help out madseason and mrr23 with a couple of threads if I could. I have never been known to cause trouble here and will be able to help out in a few areas..

I would like to help with the stereo and electronics section since before I joined the army I helped out a local shop with installs, now work as an aviation electrician and am really good with wires and troubleshooting, and have personally installed a 3300 watt stereo in my T/A so its safe to say I can help make music lol..

I would also like to help out in the Nitrous section. I have a car over 100,000 miles and have put about 200lbs of nitrous through it safely ranging from 50- 175 shot in the last 2 years and that should speak for itself..

I think I could also help out the drag racing forums by providing tips/tricks, helping to explain altitude correction, and just general ways to keep ets down.
With that I think I could also help keeping trouble makers out of the kill stories threads since I read through those for entertainment everyday at work.

well that's it just lemme know

[sunsetorangess]

Whats up ed,
Figured i would drop you a quick reply, I would like too lend a helping hand in just about any section.
I visit the site more than once or twice a day. Iv been a mechanic for about 10 years now so i can figure alot of stuff out. Whatever i dont know i can research.
Well just drop me a line if interested
thanks
J

[bigboykilroy]

i have a 98 firebird v6 that i just completed the 98 LS1 engine swap, with no probelms. I can help if needed

[silverz98]

i dont know alot got ill help where i can, ask Rob hastings

[1SICZ]

I would like to help out in the appearance section. I have few posts now but I was an active member before and have a lot posts on Ls1Tech.com....I am a car detailing nut it would be awesome to help out others. Thanks for your consideration.

John

[jimmyblue]

This site seems to need a lot more babysitting than the
ones I already mod at. If you're looking for disciplinarians
that would not be me. I don't mind helping people but
they have to wipe, for themselves. Computers & Tuning
is the only section I'll admit to looking in on with any
regularity. Though it seems to be pretty low activity
and doesn't look to need much help.

Do babysitters get fridge priveleges? And do you have
HBO?

[nosfed]

Being the fastest fbody on this site, I should be a mod somewhere.

[Ed Blown Vert]

Just remember guys. You don't have to be a Moderator to help.

[Nitrous]

I'm with Ed! We're all moderators in our own way we just don't have the control / banning powers of a thread. It's pretty awsome to be able to help friends out. Keep it up guys and gals!

[rotwiler]

If you need another moderator for the General Help section I am up for the task. Been a member her since 2002, have given advice in the audio forums many many times(most my posts are there). Own a 2002 Z28 and also drag race for the local CCC ET drags, I have also done many appearance mods and I am always willing to help and treat people with respect. I am also a member of a large Camaro club in my area and help out with issues there too. I am a mental health counselor in life, so I can keep myself under control when people get out of hand and act like fools. I'm 39 and here to learn and help people when I can.

[Ed Blown Vert]

If you need another moderator for the General Help section I am up for the task. Been a member her since 2002, have given advice in the audio forums many many times(most my posts are there). Own a 2002 Z28 and also drag race for the local CCC ET drags, I have also done many appearance mods and I am always willing to help and treat people with respect. I am also a member of a large Camaro club in my area and help out with issues there too. I am a mental health counselor in life, so I can keep myself under control when people get out of hand and act like fools. I'm 39 and here to learn and help people when I can.


Is that you Darrin?

[rotwiler]

No, I know someone who posts on another site with simular name, but was spelled rottweiler and his name is Darrin. He has a NBM T/A and lives in my area. See him at the track when I race with Team NW Fbody.

[ProjectCamaro.com]

No, I know someone who posts on another site with simular name, but was spelled rottweiler and his name is Darrin. He has a NBM T/A and lives in my area. See him at the track when I race with Team NW Fbody.

You should have said yes. He would have made you a mod :brick:

I mean I'm Darin so go ahead and make me a mod for the Appearance Section. (Can't blame me for trying)

[Ed Blown Vert]

:hahano:

[rotwiler]

Middle name is Daryl, is close, does that count lol

[ss~zoso~ss]

would it be possible for me to become the mod of the multimedia section?

[Mr. Luos]

Sarge thinks my motor is sexy.

[ss~zoso~ss]

what do you say ED, third shift agrees :)

[ss~zoso~ss]

come on ed, its been a few days, i know you get a lot of PMs

[Ed Blown Vert]

I am considering it, I also have another Mod willing to take the forum.

[ss~zoso~ss]

alright, sounds good

[Ed Blown Vert]

alright, sounds good

What did you get an Alert for?

[ss~zoso~ss]

talk to Mr22 about that, it is supposed to be removed

to me the post wasnt very offensive but he thought it was, i called somebody in the political debate section an "anti american"

[ss~zoso~ss]

whats his name Mr223 or something

[Ed Blown Vert]

talk to Mr22 about that, it is supposed to be removed

to me the post wasnt very offensive but he thought it was, i called somebody in the political debate section an "anti american"

Looks like it was removed, just didn't come off your account. I'll fix that.

I was only asking because no one can be a Mod if they have a warning.

[ss~zoso~ss]

does that rule me out, i mean if you read the post i really didnt think the warning was called for

[ss~zoso~ss]

i've never had any problems with members at all, not even any trolls

[Ed Blown Vert]

does that rule me out, i mean if you read the post i really didnt think the warning was called for

It would. But I cleared your account.

[ss~zoso~ss]

alright thanks

[ss~zoso~ss]

this IP address has attacked my computer 17 times, i was wondering if you could pull any info on it

137.99.140.178(49161)

[Ed Blown Vert]

No user I can find with that IP

d140h178.resnet.uconn.edu

[ss~zoso~ss]

where did that second line comefrom, it looks relavent

[Nitrous]

Here's some more info for you. Looks like some college kids playing with you probably someone you know. My Neo Trace is down right now because I got hacked but they'll pay! They have a suprise coming. Hope you catch them. LMAO

Search results for: 137.99.140.178

OrgName: University of Connecticut
OrgID: UNIVER-73
Address: University Information Technology Services
Address: 196 Auditorium Road, Unit 3138
City: Storrs
StateProv: CT
PostalCode: 06269-3138
Country: US

NetRange: 137.99.0.0 - 137.99.255.255
CIDR: 137.99.0.0/16
NetName: UCONN-NET
NetHandle: NET-137-99-0-0-1
Parent: NET-137-0-0-0-0
NetType: Direct Assignment
NameServer: NICKY.UCONN.EDU
NameServer: BRCGATE.UCONN.EDU
NameServer: RESOLVER1.QWEST.NET
NameServer: RESOLVER2.QWEST.NET
Comment:
RegDate: 1989-11-15
Updated: 2005-02-01

RTechHandle: ML1388-ARIN
RTechName: Lang, Mike
RTechPhone: +1-860-486-6816
RTechEmail: Mike.Lang@uconn.edu

OrgAbuseHandle: JPU15-ARIN
OrgAbuseName: Pufahl, Jason
OrgAbusePhone: +1-860-486-3743
OrgAbuseEmail: abuse@uconn.edu

OrgNOCHandle: MORYT-ARIN
OrgNOCName: Morytko, Steve
OrgNOCPhone: +1-860-486-1405
OrgNOCEmail: Steve.Morytko@uconn.edu

OrgTechHandle: ML1388-ARIN
OrgTechName: Lang, Mike
OrgTechPhone: +1-860-486-6816
OrgTechEmail: Mike.Lang@uconn.edu

[ss~zoso~ss]

thanks a bunch, will you be able to provide any more info (if there is more) when your neo tracker works again, if so PM it to me please

thanks, jeff

[Nitrous]

Yep, I might be able to.

[ss~zoso~ss]

so what do ya say ed, should we start a poll, lol jk

[Ed Blown Vert]

so what do ya say ed, should we start a poll, lol jk

That forum doesn't look like it needs a Mod yet. ;)

[ss~zoso~ss]

man, ur killing me

[Ed Blown Vert]

man, ur killing me

If we need one, you will be one of the first I look to.

I want contributing member to be Moderators.

Not just members that want to be Mods.

[ss~zoso~ss]

lol, i dont contribute, lol

alright your're the boss

[ss~zoso~ss]

how about now?

[Y2KPewterSS]

If this is you, post up why you think you should be a Moderator.
And what forums you would be interested in watching.
Some background about you would help.

Any questions please post them here.


Very interested in being a mod for this forum. I have been around fbodies and LS based scene for 4+ years now. I am very comfy with the vbulletin sites, I moderate another site that is vbulletin based. The areas that I am strongest in are appearance, show/shine, external motor, suspension/handling and Camaro's in general. :)

[Ed Blown Vert]

lol, i dont contribute, lol

alright your're the boss

That wasn't directed at you. ;)

how about now?

I don't see a need for a Mod in that section yet.....

[Ed Blown Vert]

Still looking for Tech Mods that can help in the forums.

[cujo]

If there is anything I can do to make the site run more smoothly, let me know. I live on this site.

[SiggyZ]

Ed,

I am both an old and a renewed member here and would be thrilled to be a moderator on this forum. If you have any questions about my reputation, you can ask Y2KPewterSS (he knows me personally). I understand the forum software well. Please let me know if you would be open to that. Thank you.

- Drew

[Y2KPewterSS]

Drew(Siggy) is a good guy and real strong in appearance & detailing. :yup:

[KageSS]

Still looking for Tech Mods that can help in the forums.

:blush: :sulk: :unhappy:

:dunno: :D

[juiced99ws6]

Still looking for Tech Mods that can help in the forums.

im always here and try to offer help whenever i can :)

[FireHawkV8]

I run my own forum, and have lots of mod exp. i am here almost everyday, and i would enforce the rules. I have not flamed anyone and have never been booted of anysite. I am also a Mod at another forum (StarTrek Forum) and have been there from the site Launch. It would be nice to help you all out, cause this site has helped me out so many times in the past, (i didn't reg but i read some stuff) and it helped me when i had my Bird. If you ever need any help just ask, i will do my best!
Thanks,
Robert