.250 spacer

[NHRAMAN]

...Can a 1/4" [.250] spacer be used with the stock wheel studs ???:dunno:...rear only needed.

[mrr23]

sure. check to make sure you have at least three full turns on the lugnuts to be somewhat safe.

[NHRAMAN]

sure. check to make sure you have at least three full turns on the lugnuts to be somewhat safe.

Thanks for the quick reply..only 3 full turns you think...another person said at least 6 full turns..[should have had longer studs put in these axles..I have 31 spline ones from a local rear-end company.]...I thought that was a little much, considering some of the things I have done in the past with other cars.!!....BTW...I already have some 1" Billet wheel adapters I was using with another set of rear wheels, but I really need 1/4" or maybe a touch more clearance really..when I got the adapters my plans for another set of wheels changed..sorta wish I had 1/2" adapters instead.....[ mrr23...I added 10% in my tuner and all seems well..runs better.]