rear wheels

[mrr23]

for the black one weld racing 15 x 10 7" backspacing. had to 'clearance' the calipers and use a 5/32 wheel spacer. with some more grinding, i might can get rid of the spacer.

http://www.stealthram.com/familypics/formula00/rearwheels.jpg

[mrr23]

more pics of them on the car. major clearancing to fit around the calipers without spacers.

http://www.stealthram.com/familypics/formula00/wheels/leftview.jpg

http://www.stealthram.com/familypics/formula00/wheels/rearview.jpg

http://www.stealthram.com/familypics/formula00/wheels/lefttire.jpg

http://www.stealthram.com/familypics/formula00/wheels/righttire.jpg

[mrr23]

This the clearance on the inner front side of the driver side tire.
http://www.stealthram.com/familypics/formula00/wheels/driverinner.jpg

Clearance around the bump stop. have at least 1.5".
http://www.stealthram.com/familypics/formula00/wheels/driverinner1.jpg

Clearance around the bump stop. have at least 1.5"
http://www.stealthram.com/familypics/formula00/wheels/passinner.jpg

This is the clearance on the passenger inner front side tire.
http://www.stealthram.com/familypics/formula00/wheels/passinner1.jpg

driver caliper.
http://www.stealthram.com/familypics/formula00/wheels/drivercaliper.jpg

passenger caliper. ground it at a 45* angle about 1/2-3/4" deep.
http://www.stealthram.com/familypics/formula00/wheels/passcaliper.jpg