cam question

[boobs]

does anybody know how aggressive the cam with a DUR. @.050 218 int/ext and a .525 intake/exhaust is?? does it lope or what.. btw this is with 1.6 roller rockers and hydrollic roller cam..

[nhraformula]

can you give full cam specs please?
lope will depend on the lsa and what youre car idles at.

[mavrikZ]

I have a good feeling that he is meaning 218/228 and .525/.525 @112---translation: Hotcam(LT1)

Hard lope! Sounds wicked.

[boobs]

hell ya thats the cam im talkin about. sry didnt tell ya it was the one in the kit.. but im getting that hotcam kit and some longtubes..

[nhraformula]

youre better off getting a 224 cam with a 112 lsa.

[mavrikZ]

Honestly, I have to agree with nhraformula. If you are JUST doing the cam kit....go bigger, like above^^ You wont get much of a gain with the cam, alone.

[boobs]

no im getting headers and maybe a 52mm tb

[mavrikZ]

No, I mean, if you get the cam without the LT4 heads and intake, the gain will not be worth the trouble. If you are JUST installing a cam with the stock heads and intake--go bigger.

[boobs]

o ok..

[SLOW346]

That is a pretty mild cam that sounds great. It has more bark than bite you could say. As for aggressiveness, it isn't. It has real lazy lobes and a slow ramp rate.

[mrr23]

i'm guessing by the posts so far, it's not for the car in your avatar. if it's for a LT1 car, then i can tell you about a guy that put the whole LT4 conversion on his LT1 camaro and picked up 100 rwhp. now that's uncommon. the norm has been 70-80 rwhp.

[boobs]

ya its an lt1 Trans Am