Where to Hookup BOV for STS Turbo

[y2konyxss]

Hello,

I was wondering if anyone had any input on where i am to hookup my BOV vacumme line on my LS1 engine.

what is the best place.

Thanks

[koolaid_kid]

Although I have an STS, my auto does not require a BOV. However, I have heard that the best place is to put a "t" in the brake booster line and connect it there.

[y2konyxss]

well i hooked it up to the brake booster tonite as well as finished the boost gauge install. other than that im basicly done my kit install.

took some time
basicly 16 hours. had lots of problems durring the install but other than that as soon as the exhaust shop is done raising the exhaust pipe to the turbo then i will be out ripping up the street.

it sounds very sweet.

[LS1 RX7]

You can tap a port off of the intake manifold and run a vacuum line to the BOV so that it gets its own signal

[Schantin]

I tapped the vacuum line exiting the driver side of the throttle body. Works fine. :)