Pacesetter y-pipe

[Skinny]

Upon reciept of my Pacesetter long tubes and ypipe I did a thorough inspection and I noticed that the hole cut in the passenger side pipe (where the 2 pipes meet) is about half the size it needs to be. You can tell by the position of the welds that the cut is way too small. I measured it and it was less than 2 inches.
http://i55.photobucket.com/albums/g150/mcmahost/ypipe.jpg

http://i55.photobucket.com/albums/g150/mcmahost/ypipe2.jpg

Has anyone ever run into this problem with the Pacesetter ypipe?
Who makes a y-pipe that will slide onto Pacesetters 'cause this workmanship is CRAP?

Thanks
Skinny

[Skinny]

And I forgot, there is a actually a flap of steel, about 3/4", that actually runs against exhaust flow.

Skinny

[mghawk57]

Mine was the same way - went in with a small die grinder and opened it up - was easy and now looks great - FYI

[MCH SS]

Mine fit great the way it came:dunno:

[nhraformula]

mine was good, no problems