I need your advice guys

[Vols Fan]

Alright after much debate I went today an got the paint to do my rear panel like a Berger Camaro. Heres my question should I put the SS badges back on the car after the paint work is done? If so can the stock ones be reused or do I have to purchase new ones? Where do you get the new ones from? Im getting this done Monday so I need some feed back. I would value your comments but I would love to see some pics. Thanks guys

[GatorSS]

You'll have to get new ones. Personally, I wouldn't paint mine like a Berger cause I think they look like crap. But if you want to make your SS look worse, go right ahead.

[graphicsgod]

Alright after much debate I went today an got the paint to do my rear panel like a Berger Camaro. Heres my question should I put the SS badges back on the car after the paint work is done? If so can the stock ones be reused or do I have to purchase new ones? Where do you get the new ones from? Im getting this done Monday so I need some feed back. I would value your comments but I would love to see some pics. Thanks guys

You can as long as you didn't destroy them pulling them off. Heat them up with a hairdryer before even attempting this. If you do bend/break them, you will have to buy new ones. Ebay is a good place to find anything :D!! To reinstall the old ones buy the 3M double sidded tape at Autozone.

Heres mine.

http://i10.photobucket.com/albums/a122/graphicsgod/MyCamaro_outside-13.jpg

Rob

[sprung_monkey]

just heat them up like he said and becareful you will be ok