Crane 1.8:1 "Quick Lift" rocker arms

[u69038]

I want to get a set of Crane 1.8:1 "Quick Lift" rocker arms.
You can buy either just the rocker arms, or the rocker arms, push rods, guide plates, and studs as a kit. There is a $300 difference in price between the 2 options.
Is the kit realy required or will the stock studs and stuff work.
Thanks in advance

[BIG D's SS]

I'm sure you will need new pushrods with those. Call and ask but I bet your tock p/rs will not work.

[MadSeason]

I want to get a set of Crane 1.8:1 "Quick Lift" rocker arms.
You can buy either just the rocker arms, or the rocker arms, push rods, guide plates, and studs as a kit. There is a $300 difference in price between the 2 options.
Is the kit realy required or will the stock studs and stuff work.
Thanks in advance because of their accelerated lift they require a shorter pushrod, 7.25 instead of the stock 7.4, but i'm not positive on that, but i do know stock pushrods will not work with it, you're better off getting the kit

[mrr23]

i answered you here http://ls1.com/forums/showthread.php?t=17900