PDA

View Full Version : cam - rwhp


C5_LS1
04-19-2006, 09:19 AM
'02 6spd c5 ls1 w/ b&b catback, vararam, LG LTs, tune, cam:
226/226 .585/.585 112 LSA what kind of power can i expect to see to the rear?

The Rookie
04-19-2006, 09:22 AM
No Dyno's in your area? It's usually really inexpensive to just go do 2 or 3 pulls to see. Local shop here does 2 pulls for 50 bucks.

C5_LS1
04-19-2006, 12:29 PM
im about to have one of these cams installed tomorrow and i was just wondering what i should expect to see before hand.

C5_LS1
04-24-2006, 09:47 PM
i finally got dyno tuned - 407rwhp 370rwtq

M6HUGGERSS
05-14-2006, 02:00 PM
i was gonna guess 400rwhp....

congrats!

oneBADDz
05-14-2006, 02:50 PM
No Dyno's in your area? It's usually really inexpensive to just go do 2 or 3 pulls to see. Local shop here does 2 pulls for 50 bucks.
dang, I could save money by driving all the way there, getting it dyno'd and driving back

justanothertech
05-20-2006, 03:06 AM
That's sick, how much money in mods do you have? Stock heads?

50anv03
05-22-2006, 05:36 PM
just had almost the same mods on my ls1 , kooks LT headers & x pipe, high flow cats, 238/238 cam,.585/.585 114,springs,lifters,rods, rockers and ram air up front. i hit 428rwhp. i was looking for 450rwhp, im gettin there.only about 150 miles on current mods and the idle still isnt right.

nitro2
05-25-2006, 06:36 PM
50ANV03 was that SAE corrected?What kind of dyno?Numbers look high.I have heads,cam,kooks headers and etc.My cam is 228/228 .588/.558 112.I just made 441 rwhp SAE corrected and that is right on with other 02-04 Z06'S.

50anv03
05-26-2006, 07:47 AM
not sure waht kind of dyno, but they did do 3 different pulls when tuneing, specs on cam and heads are correct.306rwp was base line before mods. final was 428rwhp. i see my cam is a little bigger.but dyno results can vary from car to car with same mods, they origanally told me around 100rwhp, but the actual tech that did the work says he has seen 140rwhp with the same mods. also by looking at my specs the intake and exhaust are the same? but very happy with the performance, just need to get the idle to settle down

C5_LS1
05-26-2006, 07:16 PM
not sure waht kind of dyno, but they did do 3 different pulls when tuneing, specs on cam and heads are correct.306rwp was base line before mods. final was 428rwhp. i see my cam is a little bigger.but dyno results can vary from car to car with same mods, they origanally told me around 100rwhp, but the actual tech that did the work says he has seen 140rwhp with the same mods. also by looking at my specs the intake and exhaust are the same? but very happy with the performance, just need to get the idle to settle down


what times have you gotten at the track?

C5_LS1
05-26-2006, 07:16 PM
That's sick, how much money in mods do you have? Stock heads?


yup, stock ls1 heads