4l60e 4x4

[s10sparky]

I am removing my 4l60e transmission out of my s10 blazer and i ran into a problem. I started unbolting my transfer case and i dont know how to take of the last bolt on the bottom passenger side. i cant get a wrench or socket on it to loosen it. Is there a special wrench that i need or do i take the transfer case and tranny together then seperate them. Im not a profesional mechanic wich is obvious. I've just had to fix my own toys. i hope i made somone laugh today.

[nitsuj]

are you removing it from the trans itself or the adapter neck I removed mine last night from the adapter neck but had to remove the transmission mount and holding beam just suport it with a jack under the tranny make sure you use a peice of wood to displace the weight on the tranny good luck