what turbo

[cjg454ss]

what are all the specs i need to buy a turbo for my 02 ss, auto, 350 rwhp i was to fab up a rear mount to make 500 rwhp. what size, a/r, thanks

[quicky06]

youll need alot more info than that.

intercooled?
what psi do you want to run
at what rpm do you want to see boost
at what rpm do you want alll the boost to be there
internal or ecternal wastegate

[cjg454ss]

youll need alot more info than that.

intercooled?
what psi do you want to run
at what rpm do you want to see boost
at what rpm do you want alll the boost to be there
internal or ecternal wastegate


simial to the sts, stock block motor, 8 lbs of boost. not too laggy, intercooler

[cailey37]

I'll save you some money....Dont try to get the STS kit to get you 500RWHP. Their base kit comes with a 63mm turbo I think and if you crank it up to 8lbs of boost you are looking at some high inlet air temps!!!! I know......you're going to say what about an intercooler....well....an intercooler will take off some of your boost.....just depends on how big it is.....if you're willing to spend the money do the research on a front mounted turbo.....I have the STS kit and I really dont care too much for it....I blew the stock motor when we cranked it up to 8lbs of boost and now we are working on a SLP 402 motor with a 76mm Hairdryer....it's taken four months and a lot of fabricating......

[cjg454ss]

I'll save you some money....Dont try to get the STS kit to get you 500RWHP. Their base kit comes with a 63mm turbo I think and if you crank it up to 8lbs of boost you are looking at some high inlet air temps!!!! I know......you're going to say what about an intercooler....well....an intercooler will take off some of your boost.....just depends on how big it is.....if you're willing to spend the money do the research on a front mounted turbo.....I have the STS kit and I really dont care too much for it....I blew the stock motor when we cranked it up to 8lbs of boost and now we are working on a SLP 402 motor with a 76mm Hairdryer....it's taken four months and a lot of fabricating......


thanks for info, im going to go head and cam with some nitrous, should get me to 430 rwhp on motor and spray a 100 shot, 530 rwhp, on an easy setup.:drivin:

[cailey37]

If you're wanting to naturally aspirated check with www.slponline.com they know their stuff and can get you to your goal of 430rwhp....

[cjg454ss]

If you're wanting to naturally aspirated check with www.slponline.com they know their stuff and can get you to your goal of 430rwhp....


ive heard slp inflates there numbers, and basically sucks:wall:

[ss~zoso~ss]

me2

[ss~zoso~ss]

there are plenty of other head and cam manufactureres out there

[cailey37]

well....I'll tell you....I have one of their 402's with a 76mm turbo on it and it will mow down just about anything on the street.........they use top quality parts.......I dont know who told you they inflate their numbers but I'll vouch for their claims on HP.....it's there.......