Post your Appearance mods here!

[Redphoenix1998]

Anything special, post it up here! Where are you EVL

Well here's my pics

Engine shot
http://memimage.cardomain.net/member_images/6/web/426000-426999/426431_84_full.jpg
http://memimage.cardomain.net/member_images/6/web/426000-426999/426431_88_full.jpg
Beauty shots
http://memimage.cardomain.net/member_images/6/web/426000-426999/426431_85_full.jpg
http://memimage.cardomain.net/member_images/6/web/426000-426999/426431_99_full.jpg

[Corvettekid82]

Okay... let me attempt to remember all the small details. Im the king of free and simple lol


http://memimage.cardomain.net/member_images/7/web/283000-283999/283439_73_full.jpg
Calipers polished, painted brackets and decals. Painted rotors and Arm.
http://memimage.cardomain.net/member_images/7/web/283000-283999/283439_146_full.jpg
Calipers behind Chrome ZO6s with Z28 valve stem covers
http://memimage.cardomain.net/member_images/7/web/283000-283999/283439_37_full.jpg
Shortened 'gills' on stock grille, chrome inserts, wire mesh and full blackout kit. Grille reinstalled with actual BOLTS that are reuseable
http://memimage.cardomain.net/member_images/7/web/283000-283999/283439_106_full.jpg
Engine bay mods: FRCs, painted TB, MAF, Fuse box covers, ASR cover, bumper support, headlight housings, dipstick, windshield washer resivoir cover, hood struts, aux. battery post cover, polished AC canister, !AIR, !Wires (hidden under fender), Mobile 1 Cap, !Stickers

[Corvettekid82]

http://memimage.cardomain.net/member_images/7/web/283000-283999/283439_5_full.jpg
4 headlight mod and foglight mod (all on at once with switches in the circuits to toggle on and off)
http://memimage.cardomain.net/member_images/7/web/283000-283999/283439_10_full.jpg
Z-28 3rd brake light, bowties added to the inside of the tail light blackout so only visable when illuminated, chrome rear inserts
http://memimage.cardomain.net/member_images/7/web/283000-283999/283439_135_full.jpg
Custom painted side markers w/ bowtie
http://memimage.cardomain.net/member_images/7/web/283000-283999/283439_125_full.jpg
custom painted headlights gloss black with only the reflectors left chrome

[Corvettekid82]

http://memimage.cardomain.net/member_images/7/web/283000-283999/283439_50_full.jpg
!Side Molding
http://memimage.cardomain.net/member_images/7/web/283000-283999/283439_149_full.jpg
The car as it sits now, as a whole. Its all in the details... :cool:

[luckyou03]

Tips, blackouts.. Thats about it for now.

http://www.adamshipley.com/ls1/rear.jpg
http://www.adamshipley.com/ls1/exhaust.jpg

[VChula]

See signature.

[Redphoenix1998]

I need to take new pics soon. Where's Brandon At? EVL? Where you at. You're getting called out homie :rotfl:

['99 SLP#24]

Corvettekid82 all but the last one are red x's for me! Nice x's though don't get me wrong!!!!

['99 SLP#24]

Headlights painted black, calipers painted red with Camaro SS decals, smoked front lenses, tinted rear lights, red Camaro decals on front air dam, 18" C6 rims

http://i20.photobucket.com/albums/b219/emig7457/Camaro%20SS/P6190091.jpg

http://i20.photobucket.com/albums/b219/emig7457/Camaro%20SS/P4230004.jpg

['99 SLP#24]

edit: fixed now Corvettekid82

[Sarge]

http://img.photobucket.com/albums/v647/sgtgeek/GoatShotSmall.jpg
http://img.photobucket.com/albums/v647/sgtgeek/Triguages3Small.jpg
http://img.photobucket.com/albums/v647/sgtgeek/CountryGTOSmall.jpg
http://img.photobucket.com/albums/v647/sgtgeek/HeatJobSmall.jpg
http://img.photobucket.com/albums/v647/sgtgeek/wheelsSmall.jpg

[Redphoenix1998]

Whoa

[Hurley711]

Caliper painted black & Trans Am decal

[Hurley711]

How are you guys posting pics so big? Mine is limited to small ass pics nowhere near those sizes. What am I doing wrong

[Ed Blown Vert]

They are linking from another site.

[Hurley711]

Ed----can't we raise the pic limit size here or what?

[Sarge]

How are you guys posting pics so big? Mine is limited to small ass pics nowhere near those sizes. What am I doing wrong
Here ya go Hurley...... http://photobucket.com/
Free...

[Hurley711]

Corvette kid is that chrome paint on your caliper?

['99 SLP#24]

No, I think he said he polished them.

[Hurley711]

Ram Air TA

[Hurley711]

Thanks guys! Just joined Photobucket

[Ed Blown Vert]

Ed----can't we raise the pic limit size here or what?


100k should be enough, right?

[blue02formula]

Chrome centers with gold chickens, gold calipiers navy pontiac decals, gold front chicken, Formula door trim, rear fill-in, headlight door Pontiac decals. I also removed red bird in tail light filler, chrome lugs.
http://img.photobucket.com/albums/v629/blue02formula/wheel2.jpg
http://img.photobucket.com/albums/v629/blue02formula/sidevent2.jpg
http://img.photobucket.com/albums/v629/blue02formula/frontbird2.jpg
http://img.photobucket.com/albums/v629/blue02formula/rearformula.jpg

[10th Hawk #88]

Blue02formula
I have a 10th anniversary and would love some side grills in gold where can i get some also for hood grills.

[Sarge]

That is one badass looking ride Blue02Formula...very nice man....

[blue02formula]

Blue02formula
I have a 10th anniversary and would love some side grills in gold where can i get some also for hood grills.

I use a not to rigid supermarket card and released the lock tabs on the vents. Wiped them down with alcohol and spray painted them gold.

Thanks Sarge.

[MarkuzLS1]

http://webpages.charter.net/mwin/BlackCar/DSC00268small.JPG
Billet aluminum hood/fender vents. I've got some Corsa tips sticking out the back, but no pictures of them.

[Alex1]

Rattle Can Painted Calipers:
http://i16.photobucket.com/albums/b9/Arock301/AR016.jpg

Shaved Side Badges:
http://i16.photobucket.com/albums/b9/Arock301/EastCoastNats.jpg

Still working on it, but Im doing a shaved Berger Panel with the CAMARO lettering filled in & smoothed out, with one 1969 Retro Badge in the center.

Before Shaved Badges w/ Corvette Grand Sports:
http://i16.photobucket.com/albums/b9/Arock301/Photos002.jpg

Tinted 5% on the hatch, 20% on the sides.

[hllywd]

Heres a couple I havent seen yet.
Lid
http://memimage.cardomain.net/member_images/8/web/848000-848999/848388_31_full.jpg
Nose badge
http://memimage.cardomain.net/member_images/8/web/848000-848999/848388_32_full.jpg
Seats
http://memimage.cardomain.net/member_images/8/web/848000-848999/848388_33_full.jpg
Door Sill
http://memimage.cardomain.net/member_images/8/web/848000-848999/848388_34_full.jpg
Pedals
http://memimage.cardomain.net/member_images/8/web/848000-848999/848388_37_full.jpg
Third Light
http://memimage.cardomain.net/member_images/8/web/848000-848999/848388_38_full.jpg

[jettlagd]

Hope you all can see the pics. Have added some Billet for the interior and engine. Looking for grilles anodised Blue, and has anyone gone thru the headlight mod?

Jett

[EVL LS1]

too much to post here...

www.evlls1.com/transam2.html

www.evlls1.com/transam.html

[chaman]

1999 Trans Am WS7

Engine: Volant CAI, Hotchkis Strut Bar, Corvette FRC, Hood Mirrors, few other billet and chrome stuff.....
http://image22.webshots.com/22/4/13/4/350841304TuXkNe_ph.jpg

Custom air dam, yellow light covers
http://image22.webshots.com/22/6/20/9/350862009khltNX_ph.jpg

Whole car AKA beauty shot!
http://image38.webshots.com/39/6/47/64/355964764YmLhjT_ph.jpg

See the whole shit here
http://community.webshots.com/photo/350833452/355964764YmLhjT

[EVL LS1]

http://www.evlls1.com/other_imgs/redx.gif

[chaman]

Dont get it, i see them...did u clicked on the link???
Try this: http://community.webshots.com/album/350833452ApFKNV/0

[EVL LS1]

yeah links work but pics posted on here don't

[chaman]

so i guess u didnt liked the car huh?

[MarkuzLS1]

Here are some better pics of mine...

Corsa tips:
http://webpages.charter.net/mwin/BlackCar/DSC00547small.JPG

Billet Inserts:
http://webpages.charter.net/mwin/BlackCar/DSC00552small-2.JPG
http://webpages.charter.net/mwin/BlackCar/DSC00553small.JPG

[EVL LS1]

lol yeah i like your car. reminds me of my v2.0 =)

[chaman]

whats a v2.0??

[EVL LS1]

v1.0 = www.evlls1.com/transam2.html

v2.0 = www.evlls1.com/transam.html

damn guess everyone on this section's already forgot about my cars lol

[FloridaZ]

Had it on the old board. Might as well put her up again. :)
Took some shots right after the wet sand and polish.

http://memimage.cardomain.net/member_images/10/web/2038000-2038999/2038714_20_full.jpg

http://memimage.cardomain.net/member_images/10/web/2038000-2038999/2038714_21_full.jpg

http://memimage.cardomain.net/member_images/10/web/2038000-2038999/2038714_26_full.jpg

http://memimage.cardomain.net/member_images/10/web/2038000-2038999/2038714_36_full.jpg

http://memimage.cardomain.net/member_images/10/web/2038000-2038999/2038714_22_full.jpg

[LOLLIROT]

Had it on the old board. Might as well put her up again. :)
Took some shots right after the wet sand and polish.

http://memimage.cardomain.net/member_images/10/web/2038000-2038999/2038714_20_full.jpg

http://memimage.cardomain.net/member_images/10/web/2038000-2038999/2038714_21_full.jpg

http://memimage.cardomain.net/member_images/10/web/2038000-2038999/2038714_26_full.jpg

http://memimage.cardomain.net/member_images/10/web/2038000-2038999/2038714_36_full.jpg

http://memimage.cardomain.net/member_images/10/web/2038000-2038999/2038714_22_full.jpg

i like that color

[1BadWS613]

Where can I get some of those billet inserts for my WS6?

[chaman]

E-bay...search for muffinbuster.

[JLSain]

!Side Molding - !SS Badges - Clear Turn Signals
http://i23.photobucket.com/albums/b389/jsain/b5dda4e4.jpg
Custom 3" Tips
http://i23.photobucket.com/albums/b389/jsain/ef0f6815.jpg
Modded Headlights (Blacked out)
http://i23.photobucket.com/albums/b389/jsain/0fd2d897.jpg
Black Vinyl Hoodscoop Insert
http://i23.photobucket.com/albums/b389/jsain/52a8a6f5.jpg
Custom Black/Reflective CAMARO Inserts - LS1.Com Sticker
http://i23.photobucket.com/albums/b389/jsain/3e19ad83.jpg
Polished Billet Grille
http://i23.photobucket.com/albums/b389/jsain/15f346c3.jpg

More to Come!!!

[1BadWS613]

Thanks chaman thats exactly what I've been lookin' for.

[dustinhickman]

ok it will not let me post any pics. until i have 10 or more posts.
edit* now i have 10 post here are some pics.*

ZL1 type grill w\ 69 camaro bowtie and the clear corners
http://home.comcast.net/~dustinhickman4603/wsb/media/1125821/site1014.JPG

more pictures to come!

dustin

[01JameSS]

http://pic15.picturetrail.com/VOL609/2550816/5066437/112162611.jpg

http://pic15.picturetrail.com/VOL609/2550816/5066437/96938220.jpg

http://pic15.picturetrail.com/VOL609/2550816/5066437/112162620.jpg

http://pic15.picturetrail.com/VOL609/2550816/5066437/112162623.jpg
OLD GRILLE

[noblesramair]

Heres the car!
http://i32.photobucket.com/albums/d45/noblesramair/772412_3.jpg

Engine Compartment
http://i32.photobucket.com/albums/d45/noblesramair/772412_11.jpg

Check This Out!!!.......Stereo!!!
http://i32.photobucket.com/albums/d45/noblesramair/772412_23.jpg


What do you guys think?

[98LSGUN]

Heres the car!
http://i32.photobucket.com/albums/d45/noblesramair/772412_3.jpg

Engine Compartment
http://i32.photobucket.com/albums/d45/noblesramair/772412_11.jpg

Check This Out!!!.......Stereo!!!
http://i32.photobucket.com/albums/d45/noblesramair/772412_23.jpg


What do you guys think?


Sweet. Doesn't all that stuff in the trunk weigh it down?

[noblesramair]

yes im sure it does but its all fiberglass. That just gives me more reasons to add more power to it! Besides i also use the car for shows

[98LSGUN]

This is me and a friend doing my suspension upgrade. I'm the guy on the left. I added the ass end of my car because that's the general view from the Mustang's point of view...

[Beast]

Well, I'm no pro, but I thought it turned out pretty good.

Doors: If I had known how much of a pain the the butt this was I never would have even started. The worst part is that I've only done one door... so I'm only half way done. :cry:

Vents: The pictures don't do this justice at all!! The paint is a metallic silver enamel that matches my car paint exactly! I shot 3 coats of base, and 3 coats of clear... and you would never know that they weren't done professionally. Hell, I wish the finish on my car was this nice...

On to the pics!!

DOOR BEFORE:
http://i33.photobucket.com/albums/d90/mark_woodruff/MYCAR001.jpg

DOOR AFTER:
http://i33.photobucket.com/albums/d90/mark_woodruff/MYCAR003.jpg

VENTS:
http://i33.photobucket.com/albums/d90/mark_woodruff/MYCAR006.jpg
http://i33.photobucket.com/albums/d90/mark_woodruff/MYCAR002.jpg
http://i33.photobucket.com/albums/d90/mark_woodruff/MYCAR005.jpg

OUTSIDE:
http://i33.photobucket.com/albums/d90/mark_woodruff/Picture020.jpg

[litemup02]

i have tried and tried again to put pics on here. I resized my images so they look about 2 in tall and still says that their too big:brick:

[Silver02TA]

http://www.ls1poweredta.com/67c.jpg

http://www.ls1poweredta.com/lotb/16b.jpg

http://www.ls1poweredta.com/57b.jpg

http://www.ls1poweredta.com/50b.jpg

http://www.ls1poweredta.com/22b.jpg


full mod list here:
http://www.ls1poweredta.com/mods.htm

[Fastcar]

Where can I get the white gauge inserts for my T/A? How much do they cost and how hard are they to install? Do the gauges still illuminate orange at night? Thanks!

[Sunset T/A]

My headrests in my sig.

[Chevypowr]

Misc. pics of my SS, Painted scoop, Eibach lowering springs, Custom Exhaust(bad pic. doesn't justify the real product)

[Chevypowr]

yeah pics, scoop painted - b&m logo- carbon fiber nose emblem, clear turn signals, Slp grill

[Chevypowr]

Where can I get the white gauge inserts for my T/A? How much do they cost and how hard are they to install? Do the gauges still illuminate orange at night? Thanks!

LMperformance.com, actually just google it, theres tons of options. Granatelli has 200mph gauge faces real nice-need calibration though

[Carlos01SS]

Okay, here goes, chrome Z06 Motorsports wheels 17X9.5 275-40-17 & 18X10.5 295-35-18 riding on GC Coilovers & Koni DA's 26" ride height front 26-3/8" rear, clear corners...

http://img.photobucket.com/albums/v486/Carlos01SS/El%20Dorado%20Park%201-17-06/P1010001.jpg

I like the stance:)

Pics of front end with recently installed RK Sports carbon fiber grill and SLP SS badge...

http://img.photobucket.com/albums/v486/Carlos01SS/El%20Dorado%20Park%201-17-06/P1010003.jpg

http://img.photobucket.com/albums/v486/Carlos01SS/El%20Dorado%20Park%201-17-06/P1010029.jpg

SLP dual-quad tips & rear valance...

http://img.photobucket.com/albums/v486/Carlos01SS/El%20Dorado%20Park%201-17-06/P1010015.jpg

http://img.photobucket.com/albums/v486/Carlos01SS/El%20Dorado%20Park%201-17-06/P1010021.jpg

http://img.photobucket.com/albums/v486/Carlos01SS/El%20Dorado%20Park%201-17-06/P1010014.jpg

[Chevypowr]

Okay, here goes, chrome Z06 Motorsports wheels 17X9.5 275-40-17 & 18X10.5 295-35-18 riding on GC Coilovers & Koni DA's 26" ride height front 26-3/8" rear, clear corners...

http://img.photobucket.com/albums/v486/Carlos01SS/El%20Dorado%20Park%201-17-06/P1010001.jpg

I like the stance:)

Pics of front end with recently installed RK Sports carbon fiber grill and SLP SS badge...

http://img.photobucket.com/albums/v486/Carlos01SS/El%20Dorado%20Park%201-17-06/P1010003.jpg

http://img.photobucket.com/albums/v486/Carlos01SS/El%20Dorado%20Park%201-17-06/P1010029.jpg

SLP dual-quad tips & rear valance...

http://img.photobucket.com/albums/v486/Carlos01SS/El%20Dorado%20Park%201-17-06/P1010015.jpg

http://img.photobucket.com/albums/v486/Carlos01SS/El%20Dorado%20Park%201-17-06/P1010021.jpg

http://img.photobucket.com/albums/v486/Carlos01SS/El%20Dorado%20Park%201-17-06/P1010014.jpg
Very nice ride. I'm not too sure about the rear valance though, it looks like it flares out a bit too much. How are the Konis treating you? I'm lookin into getting some single adjustable myself.

[Carlos01SS]

Very nice ride. I'm not too sure about the rear valance though, it looks like it flares out a bit too much. How are the Konis treating you? I'm lookin into getting some single adjustable myself.


Single adjustable Koni's are great, matter of fact they're better in the rears than the DA's, apparently the rear SA's are built a bit beefier than the rear DA's.

Looks like my rear DA's are blowing out :( they have issues like that.

I'm going to replace my rear DA's with the SA's thru Sam Strano. :)

Front DA's are hunky-dory, no issues there whatsoever.

[Chevypowr]

Are Konis lifetime waranteed? What do you have the valving adjusted to? I also was considering bilsteins, I have a set of the HD struts on my VW. I've had them on the car for about 3years now with race springs, It handles like a go kart, but real real smooth when it comes to the neglected roads (which around me there are plenty). They still have the same ride as when they were brand new.

[Chevypowr]

how about the adj. panhard bar, did that help out? My SS is dropped about 1.5in front and back with the eibachs and I know the rear axle has to out of center. There is so many chasis/suspension mods available for these cars I dont know where to start. Panhard bar, or subframe conectors are next. Or torque arm, to much to think about.

[Carlos01SS]

Are Konis lifetime waranteed? What do you have the valving adjusted to? I also was considering bilsteins, I have a set of the HD struts on my VW. I've had them on the car for about 3years now with race springs, It handles like a go kart, but real real smooth when it comes to the neglected roads (which around me there are plenty). They still have the same ride as when they were brand new.

Koni's are lifetime warranted, I just don't want to have my car on blocks for a few weeks and then wait for Koni to fix them and send them back...Apparently Koni charges to rebuild, so lifetime warranty my ass.:toetap:

Anyway stories about the rear DA's blowing out is common, I'd rather just get the SA's for the rear and call it a day.

If your car is lowered, the Bilstein HD's are not ideal because they were designed for Camaro's with factory springs. You'd be better off calling Sam Strano, tell him what kind of springs you bought, he can get Bilsteins for you and revalve them to match your spring settings and THEN you'll be rockin:burnout:

[Carlos01SS]

how about the adj. panhard bar, did that help out? My SS is dropped about 1.5in front and back with the eibachs and I know the rear axle has to out of center. There is so many chasis/suspension mods available for these cars I dont know where to start. Panhard bar, or subframe conectors are next. Or torque arm, to much to think about.

Adj. phb did the trick.:yup:

Get the phb first, then go for the shocks, and while you're at it, sounds like you want better traction since you brought up the torque arm...What about lower control brackets? Since your car is lowered your LCA'a are not at the right angle anymore, so LCA brackets will allow your LCA's to be put at the correct angle.

[Chevypowr]

Koni's are lifetime warranted, I just don't want to have my car on blocks for a few weeks and then wait for Koni to fix them and send them back...Apparently Koni charges to rebuild, so lifetime warranty my ass.:toetap:

Anyway stories about the rear DA's blowing out is common, I'd rather just get the SA's for the rear and call it a day.

If your car is lowered, the Bilstein HD's are not ideal because they were designed for Camaro's with factory springs. You'd be better off calling Sam Strano, tell him what kind of springs you bought, he can get Bilsteins for you and revalve them to match your spring settings and THEN you'll be rockin:burnout:

Right on dude, thanks alot. yeah i guess thats what the sports are for, the shortened shock body. I guess LGmotorsports can also get custom valving done also.

[Chevypowr]

yes, I have the lca relocation brackets at home I need to throw them in, I was going to get all the rear traction sh*t then install them all at one time while its ripped apart. I also have 3.73 I need to have installed - I'm not going to do that, I wouldn't want to mess the shimming and all that up.

[topgun1851]

My car isnt really a show car, but i try to keep her as clean as possible. here are a few mods i've done to stella. i loved everything about the 4th gen WS6s except for the look of the rear end, i took car of that:)

just go here, my pics are too large to upload to ls1.com
cardomain.com/ride/535621

[NotSoStock99TA]

Anybody like flames??

[BowtieFever]

NotSoStock99TA

What kind of wheels are they? Are they 17"?
Thanks!

[NotSoStock99TA]

17x9" American Racing 'Rebels'...For Sale btw

[BowtieFever]

You've got a pm

[FloridaZ]

^
|
Want some 18's? ;)

[BowtieFever]

Are your 18" wheels & tires for sale? If so, send me the specifics on them.
Thanks.

[predator]

not so stock where did you get that t/a... it looks exactly like one that was for sale in my town like a month ago... btw my town is Littlerock...... i wne tto look at it and it was sold...

although i thought its had fiske (sp) on it

[04goatinmass]

here my baby
pictures were taken with a camera phone and it was about 10degrees outside as well...its only a v6 but i loved the bird so much that i had to have something considering no ws6's are sold in my area
http://i3.photobucket.com/albums/y96/gr8guy77/MyPictures-10.jpg
http://i3.photobucket.com/albums/y96/gr8guy77/MyPictures-06.jpg
http://i3.photobucket.com/albums/y96/gr8guy77/MyPictures-05.jpg
http://i3.photobucket.com/albums/y96/gr8guy77/MyPictures-04.jpg
http://i3.photobucket.com/albums/y96/gr8guy77/MyPictures-03.jpg
http://i3.photobucket.com/albums/y96/gr8guy77/MyPictures-02.jpg
http://i3.photobucket.com/albums/y96/gr8guy77/MyPictures-01.jpg

[bzzben]

FloridaZ I love the ground effects on your camaro. know where I could get a set?

[screamin chicken]

heres my 2000 WS6 with 34,xxx miles, mods are in the eibach sportlines,more in sig http://i46.photobucket.com/albums/f105/blackbird3/Picture057.jpg

[screamin chicken]

http://i46.photobucket.com/albums/f105/blackbird3/Picture056.jpg

[feet739]

Heres a couple I havent seen yet.
Lid
http://memimage.cardomain.net/member_images/8/web/848000-848999/848388_31_full.jpg
Nose badge
http://memimage.cardomain.net/member_images/8/web/848000-848999/848388_32_full.jpg
Seats
http://memimage.cardomain.net/member_images/8/web/848000-848999/848388_33_full.jpg
Door Sill
http://memimage.cardomain.net/member_images/8/web/848000-848999/848388_34_full.jpg
Pedals
http://memimage.cardomain.net/member_images/8/web/848000-848999/848388_37_full.jpg
Third Light
http://memimage.cardomain.net/member_images/8/web/848000-848999/848388_38_full.jpgHey hllwd where did you get that brake light from. That is cool!!:yup:

[feet739]

Hey hllwd where did you get that brake light from. That is cool!!:yup:Are there any for a T/A WS6?:thinkin:

[nhra-trans-am]

I made one for my bird, it's my avatar.

[GottaHaveLS1]

http://i51.photobucket.com/albums/f362/chozen418/Picture002.jpg
Don't ask about the cobra rims, they were on the car when i bought it.
http://i51.photobucket.com/albums/f362/chozen418/Picture001.jpg
Lettering on rear calipers:
http://i51.photobucket.com/albums/f362/chozen418/Picture003.jpg
More pics coming soon...

[MikeSomething]

3rd Brake Light...
http://i18.photobucket.com/albums/b101/mikesomething/IMG_0433.jpg
LED Tail Lights
http://i18.photobucket.com/albums/b101/mikesomething/IMG_0262.jpg

[chaman]

I would like to know where you got that cool 3rd brake light also. Here are a couple of mine:

Volant CAI (performance and appearance)
http://i11.photobucket.com/albums/a198/chaman3872/100_0175a.jpg

Dual gauge pod (D-PIC Auto meter, Interceptor Gauge/scan)
http://i11.photobucket.com/albums/a198/chaman3872/100_0172a.jpg

A4 MBA shifter, custom aluminum HVAC knobs, Ipod
http://i11.photobucket.com/albums/a198/chaman3872/100_0173a.jpg

Custom aluminum gauge bezel
http://i11.photobucket.com/albums/a198/chaman3872/100_0158.jpg

Red neon interior ambient lightining
http://i11.photobucket.com/albums/a198/chaman3872/100_0151a.jpg

Brushed Aluminum Fuel Door
http://i11.photobucket.com/albums/a198/chaman3872/100_0312a.jpg

Stainless Steel emblems/grills
http://i11.photobucket.com/albums/a198/chaman3872/100_0315a.jpg
http://i11.photobucket.com/albums/a198/chaman3872/100_0314a.jpg
http://i11.photobucket.com/albums/a198/chaman3872/100_0307a.jpg
http://i11.photobucket.com/albums/a198/chaman3872/100_0306a.jpg


1967-68 Firebird emblem
http://i11.photobucket.com/albums/a198/chaman3872/100_0302a.jpg
http://i11.photobucket.com/albums/a198/chaman3872/100_0301a.jpg

LS1 emblem/5.7 LITER emblem
http://i11.photobucket.com/albums/a198/chaman3872/100_0316a.jpg

Yellow Fog Light covers (sometimes I use them sometimes dont), custom Stainless Steel air dam
http://i11.photobucket.com/albums/a198/chaman3872/100_0334a.jpg

Overall view
http://i11.photobucket.com/albums/a198/chaman3872/100_0195a.jpg

[t/a for life]

where did you get the ls1 stickers for the airbox or did you just paint them on there it looks sweet im getting the corvette engine covers also it looks awsome

[Chevypowr]

http://www.ls1.com/forums/desktopThese This is my car with the eibachs, also good pics of my diesel exhaust tip I welded on after my Borla 3" Xr-1 sportsman oval

[04goatinmass]

I would like to know where you got that cool 3rd brake light also. Here are a couple of mine:

Volant CAI (performance and appearance)
http://i11.photobucket.com/albums/a198/chaman3872/100_0175a.jpg

Dual gauge pod (D-PIC Auto meter, Interceptor Gauge/scan)
http://i11.photobucket.com/albums/a198/chaman3872/100_0172a.jpg

A4 MBA shifter, custom aluminum HVAC knobs, Ipod
http://i11.photobucket.com/albums/a198/chaman3872/100_0173a.jpg

Custom aluminum gauge bezel
http://i11.photobucket.com/albums/a198/chaman3872/100_0158.jpg

Red neon interior ambient lightining
http://i11.photobucket.com/albums/a198/chaman3872/100_0151a.jpg

Brushed Aluminum Fuel Door
http://i11.photobucket.com/albums/a198/chaman3872/100_0312a.jpg

Stainless Steel emblems/grills
http://i11.photobucket.com/albums/a198/chaman3872/100_0315a.jpg
http://i11.photobucket.com/albums/a198/chaman3872/100_0314a.jpg
http://i11.photobucket.com/albums/a198/chaman3872/100_0307a.jpg
http://i11.photobucket.com/albums/a198/chaman3872/100_0306a.jpg


1967-68 Firebird emblem
http://i11.photobucket.com/albums/a198/chaman3872/100_0302a.jpg
http://i11.photobucket.com/albums/a198/chaman3872/100_0301a.jpg

LS1 emblem/5.7 LITER emblem
http://i11.photobucket.com/albums/a198/chaman3872/100_0316a.jpg

Yellow Fog Light covers (sometimes I use them sometimes dont), custom Stainless Steel air dam
http://i11.photobucket.com/albums/a198/chaman3872/100_0334a.jpg

Overall view
http://i11.photobucket.com/albums/a198/chaman3872/100_0195a.jpg
the red interior lights..did you change out the bulbs or are they custom?what part number lights and where you get them .also about the ipod is that a special holder and how did you run the charger to it?

[RAWPWR3]

http://i11.photobucket.com/albums/a198/chaman3872/100_0316a.jpg
Where did ya get that, an how much, it looks good. (the ls1 decal )

[Snake Eater]

:)

[saint]

Here are mine, custom wheels/tires , blackouts all around, stripes, CETA bumper, and vinyl accents. (i have black PONTIAC lettering now on the back and got rid of the white in the middle of the tails, this pix are from january in FL)

http://i20.photobucket.com/albums/b230/saintjezter/FL_Jan06/Beach.jpg
http://i20.photobucket.com/albums/b230/saintjezter/FL_Jan06/DarkBlue.jpg
http://i20.photobucket.com/albums/b230/saintjezter/FL_Jan06/Distorted.jpg

http://i20.photobucket.com/albums/b230/saintjezter/FL_Jan06/Garage3.jpg
http://i20.photobucket.com/albums/b230/saintjezter/FL_Jan06/Garage4.jpg
http://i20.photobucket.com/albums/b230/saintjezter/FL_Jan06/Half.jpg

http://i20.photobucket.com/albums/b230/saintjezter/FL_Jan06/sunset.jpg
http://i20.photobucket.com/albums/b230/saintjezter/FL_Jan06/Wheels.jpg
http://www.goddlee.com/misc/FLJan06/backroof.jpg

http://www.goddlee.com/misc/FLJan06/birdsky.jpg

[GottaHaveLS1]

nice wheels... I'd love to have those. Where did you get the firebird center cap for the c6's?

[Chevypowr]

i welded this tip, I welded the small end of a reducer pipe to an exhaust flange, then welded a piece of bent 3" pipe that was cut on an angle onto the reducer. Polishing will take place tonight

[Sweet Lou]

I would like to know where you got that cool 3rd brake light also. Here are a couple of mine:

Volant CAI (performance and appearance)
http://i11.photobucket.com/albums/a198/chaman3872/100_0175a.jpg

Dual gauge pod (D-PIC Auto meter, Interceptor Gauge/scan)
http://i11.photobucket.com/albums/a198/chaman3872/100_0172a.jpg

A4 MBA shifter, custom aluminum HVAC knobs, Ipod
http://i11.photobucket.com/albums/a198/chaman3872/100_0173a.jpg

Custom aluminum gauge bezel
http://i11.photobucket.com/albums/a198/chaman3872/100_0158.jpg

Red neon interior ambient lightining
http://i11.photobucket.com/albums/a198/chaman3872/100_0151a.jpg

Brushed Aluminum Fuel Door
http://i11.photobucket.com/albums/a198/chaman3872/100_0312a.jpg

Stainless Steel emblems/grills
http://i11.photobucket.com/albums/a198/chaman3872/100_0315a.jpg
http://i11.photobucket.com/albums/a198/chaman3872/100_0314a.jpg
http://i11.photobucket.com/albums/a198/chaman3872/100_0307a.jpg
http://i11.photobucket.com/albums/a198/chaman3872/100_0306a.jpg


1967-68 Firebird emblem
http://i11.photobucket.com/albums/a198/chaman3872/100_0302a.jpg
http://i11.photobucket.com/albums/a198/chaman3872/100_0301a.jpg

LS1 emblem/5.7 LITER emblem
http://i11.photobucket.com/albums/a198/chaman3872/100_0316a.jpg

Yellow Fog Light covers (sometimes I use them sometimes dont), custom Stainless Steel air dam
http://i11.photobucket.com/albums/a198/chaman3872/100_0334a.jpg

Overall view
http://i11.photobucket.com/albums/a198/chaman3872/100_0195a.jpg

I would like to know where you got that shifter knob, and the fuel door. throw in the badging as well, although I will have to decide about removing all the blackout I have currently first.

[eddielb]

Do they sell the brushed aluminum for the headlight button? and could we dip them in chrome maybe? I would like to swap out for a chromed gauge overlay and chrome buttons all over

[saint]

nice wheels... I'd love to have those. Where did you get the firebird center cap for the c6's?


Thanks man. Theyre custom painted actually. The wheel as well. It was originally machine faced. So I had the faces and the caps painted along with the birds. :)

[04goatinmass]

chaman you never did tell me how you did the red lights for your interior

[Wulfe13]

http://img.photobucket.com/albums/v75/wulfe13/car%20pics/WS7Postingpic2.jpg
http://img.photobucket.com/albums/v75/wulfe13/car%20pics/69fe5378.jpg
http://img.photobucket.com/albums/v75/wulfe13/car%20pics/StrutTowerBrace001edited.jpg
http://img.photobucket.com/albums/v75/wulfe13/car%20pics/StrutTowerBrace002edited.jpg
http://img.photobucket.com/albums/v75/wulfe13/car%20pics/KSHECarShow2.jpg
http://img.photobucket.com/albums/v75/wulfe13/car%20pics/KSHECarShow1.jpg