PDA

View Full Version : ported tb's

Italiano
02-23-2006, 11:35 AM
heres a probably obvious question but I have no idea... can you port a tb on your own or does it have to be taken in? If so, how much would that run me?
BIG D's SS
02-23-2006, 11:37 AM
I just tried messed it up so I boutght a BBK. It only cost about $150 to have yours ported.
Italiano
02-23-2006, 11:38 AM
is it worth it? are there any other bolt on's recomended to work with it?
White98TA
02-23-2006, 09:31 PM
send it to new era performance. They do them for 75 bucks and do a good job on them too. Ported tb's are usually claimed 6-8 hp. Its definately worth it. An ls6 intake is also something that people like to add while they port their tb's, if your dont already have one.
oneBADDz
02-23-2006, 10:14 PM
It's easy to do yourself, I'd like to know what big d messed up. I've done a couple LS1s and a couple of vortech 350s and one LT1, never had a problem. There are some great write-ups on it if you wanna give it a go, just search for em on here
white01ws6
02-24-2006, 12:18 AM
there is only one tb you should get....... a shaner TB. www.s2performance.net
By far the best TB out there and a good price too.
SeVeReDiStOrTiOn
02-24-2006, 12:34 AM
there is only one tb you should get....... a shaner TB. www.s2performance.net
By far the best TB out there and a good price too.
:werd: He does a awesome job..I have the s2 satin and it's awesome. He also does the bump stop mod on it and epoxies the inside. He might still have the deal for $125 shipped for a s2 satin..plus $150 core charge. Or you can just send him yours if it's not a DD.
Liquifire
02-24-2006, 04:15 AM
:werd: He does a awesome job..I have the s2 satin and it's awesome. He also does the bump stop mod on it and epoxies the inside. He might still have the deal for $125 shipped for a s2 satin..plus $150 core charge. Or you can just send him yours if it's not a DD.
how large are they approximately after they are ported from Mark?
skar
02-24-2006, 05:26 AM
Loco shops in my area some say no need for stock or under 500 hp others say yes do it ?
oneBADDz
02-24-2006, 05:31 AM
they can say no need, that's what people say about LS6 intakes also, but a gain is inevitable either way. Any mod you do will gain you more in combination with any other, but one by one you will still gain SOMETHING
SeVeReDiStOrTiOn
02-24-2006, 11:11 PM
how large are they approximately after they are ported from Mark?
Next time i'm under the hood (probably tommorrow) i'll measure for ya. Visually it's quite a bit bigger.
SLOW346
02-25-2006, 12:02 AM
Do it yourself for free and save some $$. It's easy, and just as good as any of the ones you can buy! I'm starting on my 3rd one now.
Azrael
02-27-2006, 04:32 AM
there is only one tb you should get....... a shaner TB. www.s2performance.net
By far the best TB out there and a good price too.

Actually most of the ported TB's are good and comparable.

I must say thought I do really love our Shaner S3, and Mark is an awesome guy to deal with, just give him a call and he will sit and answer your questions and even chat you up!

Here is our S3 prior to install.

http://www.dark-earth.net/images/shaners3tb1.jpg
http://www.dark-earth.net/images/shaners3tb2.jpg
http://www.dark-earth.net/images/shaners3tb3.jpg
New Era Performance
02-28-2006, 07:09 PM
The diameter of the blade is about 75.5 mm , the inlet of the throttle body unported is about 72.5 mm . When you port the throttle body , you blend the lips flush and smooth out the entire opening along with achieving a nice finish , I have seen as much as 11 rwhp on a car after we did it .

Mike
New Era Performance