Swap from manual to auto

[rgvouter]

i dunno maybe i should post this here instead but, has anyone done this? and if so is this hard to do, what needs to be done, and is this a cheaper way to go vs rebuilding my manual tranny

[Zack]

Depends on how serious of an automatic you want and the kind of HP you have, A stock automatic is no big deal but if you want a real performance street/ Strip unit they will run about $3000. with a high stall 10 inch converter, You can get a serious unit from Yank Racing

[lbz34]

A th350/400/PG is easily doable from the M6. If you are trying to go to a 4l60/80e you will need the trans harness, pcm ut of an auto. IMHO I would not go to the 4l60/80 stuff over the TH350/400/PG. Copst wise you could do a TH400 with Gear vendors overdrive unit. Gerat power capability and you get to keep the freeway drivebility for close to the same price as a built 4l60e.

[94formulaLT1]

is your tranny basically screwed or what cause if its still good id be interested in a swapt i have a A4 with a shift kit.

[Zack]

A serious 400 with a 10 inch converter will set yo back $1500 to $1800 the Gear Vender unit is $2400 plus installation which is not a walk in the park, Now you have your power being routed through a biger higher inertia level trans than the 4L60E and going through the GV unit as well. No comparison get your transmission remanufactured By Yank with a 10 inch converter for $3295.00 includes shipping you do not need to buy a computer you already have it and you will be a lot better off. Don,t hack up a nice ride.

[kobuzz]

HEY,
Wow,
I want to convert from an A4 to m6 from my 01 T/A ws6. We could completely swap parts and pretty much pay nothing for parts, Even better just swap cars, just kidding about the cars thing.. Call me if you're interested... 315-771-6397 or 585-582-2612... or email korey@shoe-store.net

Korey