PDA

View Full Version : NOS for 402

CharlieSS
02-20-2006, 09:12 AM
I got a SLP 402 with LS6 heads. I want to spray now. I've heard that some people had trouble with these engines. But I want a 200 shot. Think this will take it?
Matt@HSW
02-20-2006, 09:28 AM
It should be okay with a good tune.

Matt

I got a SLP 402 with LS6 heads. I want to spray now. I've heard that some people had trouble with these engines. But I want a 200 shot. Think this will take it?
CharlieSS
02-20-2006, 01:05 PM
What about my rear end? And what NOS system do you recommend?
Matt@HSW
02-20-2006, 01:18 PM
Sticky tires? If so it won't last too long. You can always run it until it breaks, then replace it with something stronger. We have a few direct port kits along with our Brute Force dual nozzle kit that would work for you. Let me know if you have any questions regarding them.

Thanks,
Matt

What about my rear end? And what NOS system do you recommend?
Sarge
02-20-2006, 07:06 PM
Wait a minute....I'm confused....SLP crate engine? Forged rods/ARP rod bolts/forged crank etc.....yes a 200 shot with PROPER TUNING....your good....go lean...and those pistons are toast.....
I assume your talking like you have stock everything in your driveline....Driveshaft/rear end etc.....You build a car from the back forwards...not the other way around...you don't show up with a kabillion RWHP and then wonder if your driveline is gonna hold it....I don't know if your an A4 or M6....yes SLP seems to have some issues with pistons don't they.....I dunno...internet dog pile mebbe...but what the hell...you got it...go with it....as for your driveline...who the hell knows....break it and hope you don't freaking kill yourself....at the least get a drive shaft safety loop....
What is the current RWHP/RWTQ factory recommended maximums for your setup...lets start there....if your stock I can tell you on a 2000 its around 290-320 RWHP....break an axle and do a hard left/right at 120mph sucks...been there done that...don't recommend it...Break a drive shaft and do the "flip" and your worm dirt.....so lets start at the beginning versus building engines and then "wondering" if your driveline will handle it.....
Do you have an M6 or an A4?
Is your drive train stock?
Are you an organ donor? Have you signed your card?
Lets start there.....