2000 Z28 and Pacesetter LT's

[tording]

I have a 2000 Z28 and I have a set of Pacesetter LT headers that I want to install. I have done a set of FLP LT headers on a 2000 SS about 4 years ago but I don;'t exaclty remember all the specifics. Can you just tell me what header installs from where?? Like does the driver side header go in from the top or the bottom of the car and does the passenger side header go in from the bottom or top of the car. I remember we have to take the starter out and undo the steering arm I believe to get them in. A little help on these issues would be greatly appreciated. One more thing is I am going to run an O/R Y pipe but I don't have the O2 sims yet. How is the car going to run without the rear O2 sensors hooked up and without any O2 sims installed??

[~redlinels1~]

The rear o2s wont have any affect on the way the car runs. You'll just get an SES light.

You want to install both headers from underneath. Also, when I installed my pacesetters I didnt have to touch any steering component. Don't forget to take the dip stick tube off either.