Rear gears

[lyle8206]

Hey guys, I have a stock 2000 Firehawk Conv with a 6 speed and auburn differential. I'm going to change my gearing to either 373 or 410. Looking for recomendations, not a daily driver but more of a once a week to work kind of car. Thanks.

[Hi-Po]

4.10's if your keeping the 10 bolt.

[ssgtwalsh]

either one will work. i like 3.73's myself, but you cant go wrong either way

[00BlackBird]

i have 410's in my ws6 6spd in fact im selling them they only have 2500 miles they are the race set of richmond and the ycost over 200$ i would take like 130$ for the set have the shims too

[lyle8206]

I guess it will be 410's, thanks for the offer on the Richmond gears but I'll be pursuing the warranty issue.

[silverWS.6]

4.10's are awesome :yup:

[DaddySS]

I went with 3.73s for two reasons - less prone to noise and better gearing for 65 -70mph cruising. 6th becomes a usable gear as an added bonus.

[jcws6]

With 4.10's, you might be running into a noise issue. Make sure you work with a competent installer. I'd recommend Motive Performance gears (or AAM), since they're generally acknowledged to be pretty quiet.