10.4 MM wires -- HP GAIN???

[98ramairguy]

I changed my plugs in my 98 Trans am to the bosch +4's---

My question is about the Taylor 10.4mm wires if anyone has had any experiences with them and if they noticed any type of gains.

[98_Formula]

+4's... u mean the 4 pronged spark plugs? no good take them back out and return them if u can... there crap... i doubt u'll see any noticable gains from wires... especially NOT in the SOTP feeling, unless u have bad wires on there that ur changin...

[mrr23]

the 10.4mm just describes the thickness of the wire itself. it helps to eliminate static noise interference. if you've ever heard a buzzing coming through the radio, that goes upand down with the engine revving, that's it.

[RainMan]

I ran the TAYLOR .409's (10.4mm) for several years. Noticed an instant improvement in the way the IROC ran, over OEM wires (No Shit). Used them with the Bosch Platinums (single tip).

Switched to the MSD Super Conductors, with the Bosch standard Platinums, then the +2 Platinums, better idle, smoother engine, crisp throttle response, Never go back to the Taylors.

My $.02