NeeD4SpeeD
01-30-2006, 08:01 PM
Well... Just thought i'd update everyone on the cam install..... Things are going well we're almost done putting the cam in and so far all the other parts have been installed...
Here's a list:
Motive 4.10's
BMR Weld In SFC's
BMR Adjustible TA
BMR LCA's
BMR Adjustible Pan Hard Rod
Nitto 555DR 315/35/17VR
That's what has been put in so far and it's looking real nice... Just gotta finish gettin the cam in with all the valveterrain and then do a bunch of pulls on the dyno to tune it and YIPPIE it's done!!!
The cam that is being installed is a Thunder Racing Custom Grind 232/237 .595/.605 111.4LSA.... So hopefully we can push past the 400 RWHP mark with the cam and majority of the supporting bolt ons!!!! We shall see!!
Here's a list:
Motive 4.10's
BMR Weld In SFC's
BMR Adjustible TA
BMR LCA's
BMR Adjustible Pan Hard Rod
Nitto 555DR 315/35/17VR
That's what has been put in so far and it's looking real nice... Just gotta finish gettin the cam in with all the valveterrain and then do a bunch of pulls on the dyno to tune it and YIPPIE it's done!!!
The cam that is being installed is a Thunder Racing Custom Grind 232/237 .595/.605 111.4LSA.... So hopefully we can push past the 400 RWHP mark with the cam and majority of the supporting bolt ons!!!! We shall see!!