4l60e

[SSMOKEshow]

will a 460le fit on an 1980 camaro 350

[67CamaroRSSS]

You have to get one that was attached to a LT1. The LS1 has a different bell housing bolt pattern.

[mrr23]

even the LS1 4L60e will bolt to the SBC motor.

[JaycenK]

I thought Gen 1 & 2 Sbc had a different bolt pattern from a gen 3, do they not?

[performabuilt]

Nope they are the same. Now the gen 4 LSX is a little different.

[mrr23]

well, technically there is a difference. the LS1 has two bottom bolts that go into the oil pan. the upper 6 bolts are the same pattern with one exception. the LS1 has one at the 12 o'clock position. the older design has one at the 1 o'clock position.

[mrr23]

rear of LS1 block

http://www.bpelowcountry.com/images/dansCORJETT/P1010774.JPG

700R4 trans bellhousing

http://www.centralfloridastreetcars.com/mrr23/images/tranny/converterintranny.jpg

[Cutlass]

will a 460le fit on an 1980 camaro 350?

And the answer to the question is yes

[JaycenK]

Yea the 4l60e is basically the same case as a 700r4 wich was used on Gen 1 small blocks in many aplications but you will need a controller for it