where to buy rear end

[jmatt07]

Do any of you guys know where to buy a 12 bolt or 9" rear end at a good price? what is the best to go with for a 98 ss m6 with around 480rwhp? should it be full spool, truloc, trutrac, detroit locker. im pretty confused about wha the difference is between them and aslo what gear to get. its a daily driver so something like 3.89 gears?

[thearborbarber]

Contact our new sponsor fast toys. They have the best price that I've found.

http://fasttoys.net/shop/product_info.php?cPath=84_24_32&products_id=110

[Jays00ss]

Quick Performance Raceing on ebay will beat anyones price hands down. Great folks and Had my custom built Hybrid 9" (Strange Pro Nodular third member, 35 splined moser axles and houseing, detroit locker with motive performance 4.30 gears) on my doorstep 5 business days after ordering. + my gears are QUIET!!!!

[Dr.Crash]

Check with KYSpeed. They have awsome prices!!!

[JwMonE99]

Quick Performance Raceing on ebay will beat anyones price hands down. Great folks and Had my custom built Hybrid 9" (Strange Pro Nodular third member, 35 splined moser axles and houseing, detroit locker with motive performance 4.30 gears) on my doorstep 5 business days after ordering. + my gears are QUIET!!!!

How much you paid?

[LS2Tuner]

Quick Performance Raceing on ebay will beat anyones price hands down. Great folks and Had my custom built Hybrid 9" (Strange Pro Nodular third member, 35 splined moser axles and houseing, detroit locker with motive performance 4.30 gears) on my doorstep 5 business days after ordering. + my gears are QUIET!!!!

:true:
They are Very good to deal with!! High quality and un beatable price.
I have gotten 6-8 different 9" rears from them for 4 different cars.
They'll beat ANY price.

http://stores.ebay.com/Quick-Performance-Racing

You don't see it they will make it for you!

And as Jay also stated you're gears should be quiet!! I don't care what kind of rearend it is or the ratio. A proper set-up ring and pinion shouldn't make noise.

[blackbirdbrain89]

i called up moser and had mine made but it was more then going to some of the ls1tech sponsors so after i told them they droped the price but mosere pissed me of missing parts cheep studs and the list goes on and on and on my next rear end will not be a moser

[Jays00ss]

How much you paid?

I got new reluctor rings installed, 5/8" long wheel studs, fill and drain plug, billit 1350 yoke, and everything else mentioned above (Strange Pro nodular third member, solid pinion bushing, Moser case and 35 splined axles, Detroit locker, Motive high performance gears) for $2350 shipped.


You will not find a better deal for a Brand new, made for new f-body, 9" rearend. Beleive me I called just about everyone out there.

[driftpin]

I just bought a nine inch from them and I chose to go with their 9" Ford Housing/Axle Package (2000 Firebird)
- Includes Tubular Torque-Arm Bracket
- Includes GM Flush Mount Housing Ends (Allows use of factory brakes)
- Moser Axles, Axle Bearings, Wheel Studs, & Retainers
- 5 on 4-3/4" Bolt Pattern, 1/2" Studs
Strange Nodular Iron S-Case, Iron Daytona Pinion Support, 1350 Steel Yoke, 3.70Motive Performance Gears, 35 Spline Detroit Locker, & Timken Bearings. I have to say the price was better than I expected.

[jmatt07]

what did you pay for yours driftpin?

[driftpin]

$2415

[driftpin]

the basic set up for up to 500hp was $1975 but I chose to go with a bit heavier duty case and axles. Probably overkill but...oh well.:D

[jujofields]

the basic set up for up to 500hp was $1975 but I chose to go with a bit heavier duty case and axles. Probably overkill but...oh well.:D

For the rear end, I'd rather have a little overkill as extra insurance anyways!

[driftpin]

That's what I was thinking. Ive seen too many people at the track try to launch be blow their rearends out. I've been lucky so far it hasn't happened to me. I think I'm going to hold on to this car for awhile so it's going to see a lot of trips down the 1/4 mile.

[jujofields]

That's exactly how I'd do it!

[jujofields]

Did you purchase your built rear right off of one of their auctions or did you call them up and work it out that way?

[driftpin]

I called up and had them build it to my specs. Great customer service so far.