PDA

View Full Version : Installed used trans.. replaced 1-2 solenoid now s


eddielb
01-08-2009, 09:48 AM
So Long story short I swapped out a used tranny from junkyard for my girlfriends 3.4 v6 1995 camaro (car was bought for 1200 2 years ago so im not buying a new tranny). Was stuck in LIMP mode, swapped out the 1-2 solenoid now it shifts BEAutifully, but then when im coming to a stop or I think when converter locks up car begins to shake, is the TC bad? Is there another solenoid I can replace? Any help would be appreciated

Goldcuffs
01-08-2009, 07:31 PM
Does it feel like it is going to stall at a stop? You have a t/c lock up solenoid that could be bad if so. Is it a 4L60E or a 700R4?

eddielb
01-09-2009, 09:27 AM
Does it feel like it is going to stall at a stop? You have a t/c lock up solenoid that could be bad if so. Is it a 4L60E or a 700R4?

I got it all fixed up ! Of all the things... it ended up being... the driveshaft yolk! :wwf:

But it's running good, real smooth, but there is a sort of "vibration" noise coming from what sounds the front or passenger side of the car... kind of like a heat shield vibrating, not sure if it's the cat (replaced 6 months ago) or something else! Doesnt do it all the time, and seems to do it a little more often when coming to a stop than when moving forward, although it has done it when sitting in idle and revving the engine :ar: