Stall speed?

[z28llr]

Does anyone know the factory stall speed for the 4l60e in a '01 camaro z28:thinkin:

[scottcamaross]

I believe the stall speed for the 4l60E in a 01 Camaro Z-28 is 1700. I've heard from several people if you go higher than 2500 Stall, you're car will feel like it's slipping. Also a Trans. cooler should always be installed.

Scott

[nhraformula]

I've heard from several people if you go higher than 2500 Stall, you're car will feel like it's slipping.

Scott

Above is incorrect. I have a 3000 stall and it doesnt feel much different than a stocker

[Firebirdjones]

Probably a TCI converter then :ughlaugh: Those things are notoriously tight.

[nhraformula]

Probably a TCI converter then :ughlaugh: Those things are notoriously tight.

yup, streetfighter.

[z28llr]

Above is incorrect. I have a 3000 stall and it doesnt feel much different than a stocker

what duration cam are you running with that stall

[nhraformula]

what duration cam are you running with that stall

224/224 581/581 114 lsa

[SteveC]

Stock stall is rated @ 1650 RPM.

SteveC :)

[Firebirdjones]

yup, streetfighter.

LOL, not a bad guess eh?? I have ran a few TCI converters and a transmission as well in the past. Had a bad experience with the trans I won't get into,,,and the converters always seemed a little too tight for what I wanted to do. Came to find out I wasn't the only one. So I steer away from TCI now. Converters aren't terrible though if you can get away with a tight one.

Probably works well with your combo since you have a cam with minimal duration and the lobes are spread out to 114,,,that really helps to smooth things out a bit and tames the converter requirement down considerably.
My wifes car has slightly less duration than yours,,but the lobe sep is tightened to 112,,although a 6 speed,,,I could get away with a stock stall with this cam if I wanted to,,,I have it tuned now to the point where it sounds like a stocker,,,baby smooth. Sorry to get off subject, just interesting stuff to me.

[nhraformula]

LOL, not a bad guess eh?? I have ran a few TCI converters and a transmission as well in the past. Had a bad experience with the trans I won't get into,,,and the converters always seemed a little too tight for what I wanted to do. Came to find out I wasn't the only one. So I steer away from TCI now. Converters aren't terrible though if you can get away with a tight one.

Probably works well with your combo since you have a cam with minimal duration and the lobes are spread out to 114,,,that really helps to smooth things out a bit and tames the converter requirement down considerably.
My wifes car has slightly less duration than yours,,but the lobe sep is tightened to 112,,although a 6 speed,,,I could get away with a stock stall with this cam if I wanted to,,,I have it tuned now to the point where it sounds like a stocker,,,baby smooth. Sorry to get off subject, just interesting stuff to me.
ive had nothing but good luck with tci converters.
the stall with the cam i have work very well as a combo.
i had the stall first and i was really happy with the performance, but when i added the cam, wow